If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I have just bought one of these Ryco catch cans the basic unit RCC350 comes with a mounting bracket, from ebay $161.
Easy fitting by mounted on the fire wall using the lower wiper motor bolt hole and earth strap bolt (with 40mm spacer). I used a spacer and a longer bolt to suit the wiper motor as I used a 32 mm spacer tube to keep the unit away from the cables and pipework.
Original top hose used to connect to Catch can by rotating it. A new is hose required for return to air cleaner. no cutting of engine cover.
Have a NW 2104 VRX with TJM snorkel so difficult to mount bracket behind air filter as others have done with the Provent. The Ryco unit is supposed to filter better than the Provent?? Supposedly the filter cartridge is interchangeable with the Provent 200
Have mounting photos if any one is interested.
Comment