Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 1 Pajero

Generation 1 Pajero NA - NG Models 1983 - 1991

Reply
 
Thread Tools Display Modes
  #1  
Old 15-03-20
tom corr tom corr is offline
Junior Member
 
Join Date: Feb 2020
Location: tasmania
Posts: 7
Default Gearbox compatibility GEN 1

Hello all, first post, just wondering if anyone can help here,
have a noisy gear box in my NG and have a question on gen 1 drive-train compatibility,
is the 5 speed manual gearbox and transfer case from a 1989 4cyl the same as the 5 speed manual gearbox in the 1990 NG 6cyl, are they interchangeable
any info will be greatly appreciated,
thanks.
Reply With Quote
  #2  
Old 15-03-20
pharb pharb is offline
Valued Member
 
Join Date: Jul 2007
Location: Tyers,Vic
Posts: 488
Default

No, gearbox behind 4cyl was quite small and problematic, based on Sigma 'box with transfer case adapted to it.
But gearbox from Gen 2 V6 will probably be same as Gen 1 V6 'box.
__________________
PCOV Member 1107.
Daily driver NX GLX
Semi retired NL GLS 3.5 (no airbags) in almost prestine condition to replace NJ.
Virtually fully retired NJ 2.8TD
Previously - NB LWB, NA SWB.
Reply With Quote
  #3  
Old 15-03-20
pharb pharb is offline
Valued Member
 
Join Date: Jul 2007
Location: Tyers,Vic
Posts: 488
Default

Quote:
Originally Posted by pharb View Post
No, gearbox behind 4cyl was quite small and problematic, based on Sigma 'box with transfer case adapted to it.
But gearbox from Gen 2 V6 will probably be same as Gen 1 V6 'box.
Edit - I have assumed you have noisey 'box in a V6.

If it is actually a 4cyl try some research on what 'boxes were used in Gen 2 4 cylinder Paj's, or MH Triton's.
Or even mid '90s Ford Couriers or Mazda Bravo's which from memory used a fuel injected version of the Astron 2 engine.
__________________
PCOV Member 1107.
Daily driver NX GLX
Semi retired NL GLS 3.5 (no airbags) in almost prestine condition to replace NJ.
Virtually fully retired NJ 2.8TD
Previously - NB LWB, NA SWB.
Reply With Quote
  #4  
Old 15-03-20
tom corr tom corr is offline
Junior Member
 
Join Date: Feb 2020
Location: tasmania
Posts: 7
Default

Thanks pharb, puts me in the picture, my bus is a 1990 ng 3lt v6 lwb wagon with rear drums and torsion bar suspension, the last of 'the square jobs' i would think.
From what you have mentioned, I most probably need mechanical parts from 90,91,92,93 3lt v6 manual and body parts from the earlier models.
Do like this little bus, haven't had her long, with its butterfly windows and so on, may need to purchases 2 parts-cars then, (thinking out loud)
could lead to death by Miss.

Last edited by tom corr; 16-03-20 at 03:31 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bull-bar Compatibility Fluffy1985 Generation 4-1 Pajero 1 24-12-18 08:27 AM
NX and NW towbar compatibility Uxxo Generation 4-3 Pajero 5 28-08-18 06:52 PM
ECU compatibility help! Drewan Generation 2 Pajero 12 25-05-17 01:43 PM
MAF sensor compatibility Alex86 Generation 2 Pajero 8 29-05-16 12:50 PM
ECU compatibility? chrisfarru Generation 3 Pajero 4 21-10-14 06:30 AM


All times are GMT +10. The time now is 06:17 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.