Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 4-3 Pajero

Generation 4-3 Pajero NW model 2011 - 2014

Reply
 
Thread Tools Display Modes
  #1  
Old 18-05-19
Peter C Peter C is offline
Junior Member
 
Join Date: Oct 2011
Location: Perth
Posts: 46
Default Glove box repair

Hello. Anyone know how to dismantle the glove box on a 2013 Paj, the one with the single glove box? I need to get to the bits on the inside as the right hand side latch has stopped working? I have it on my work bench but can see no way to open it. Seems glued together? Help
?

Last edited by Peter C; 18-05-19 at 01:24 PM. Reason: more info
Reply With Quote
  #2  
Old 18-05-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,659
Default

Post in the gen 3 section will get better results I reckon.

Do a google search for pajero nm glovebox will give some good threads and info.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #3  
Old 18-05-19
Peter C Peter C is offline
Junior Member
 
Join Date: Oct 2011
Location: Perth
Posts: 46
Default

Hello there.Thanks for the response. Unfortunately the NM and pre 2012 models have 2 glove boxes.Heaps of info on them but nothing in relation to the single version.
Reply With Quote
  #4  
Old 18-05-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,659
Default

All Gen 4 models from NS 2007 onwards have only 1 glovebox.

Found this thread below but doesn't say how to open it.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #5  
Old 18-05-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,659
Default

Also found this but not much in how to open it.

https://www2.pajeroclub.com.au/forum...ad.php?t=34711
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #6  
Old 20-05-19
gerbek1 gerbek1 is offline
Junior Member
 
Join Date: Jan 2017
Location: Johannesburg, South Africa
Posts: 12
Default

Use a spatula or plastic trim removal tool and remove the wood like trim above the glove box.

Then remove the three screws that are located behind it.

Then underneath on the left side is a small black plastic clip, remove this carefully with a small flat screw driver and then there are two M6 bolts that require a 10mm socket to remove.

Once all this is loose you can remove the entire glove box unit by letting it drop down onto the floor, be careful of the wiring that will still be attached. Now you can inspect how to get to the latches in order to open it.
Reply With Quote
  #7  
Old 21-05-19
Peter C Peter C is offline
Junior Member
 
Join Date: Oct 2011
Location: Perth
Posts: 46
Default

I have the glove box on my work bench.The lid is a sealed unit.So only way in is with a dremel.The mechanism that operates the catches is made from crappy plastic.Basically it has worn itself out and there is no way to fix it.Like most modern stuff it is a bin and buy new.I have spent the past 4 days online searching the net for spares or used.No joy on the post 2012 models gloveboxes.Guess the yards sell them as quick as they come in.Will have to be OEM..and can only begin to guess the price.
Reply With Quote
  #8  
Old 21-05-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,659
Default

Just did a quick google search and found this below.

https://www.ebay.com.au/i/4017372704...91b3b9ffd96a7d


Could try Partsouq.com or Amayama.com, online genuine parts and normally cheaper than thr9ugh dealer.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #9  
Old 21-05-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,659
Default

Sorry but I am a bit confused as you keep mentioning post 2012 gloveboxes.

As I have previously said all Gen 4's are the same glovebox cover, so any NS, NT or NW glovebox cover will do.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NP glove box won't open Smiderman Generation 3 Pajero 5 23-11-15 06:43 PM
glove box pajeroger Generation 3 Pajero 4 22-07-14 04:35 PM
UHF in glove box? Dougb Electrical / Radios 5 28-02-14 10:24 PM
Glove Box Adjustment Daza Ant Generation 4-1 Pajero 3 30-05-10 11:09 AM
Glove box SteveG Generation 4-1 Pajero 8 14-02-10 08:22 AM


All times are GMT +10. The time now is 10:54 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.