Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 4-3 Pajero

Generation 4-3 Pajero NW model 2011 - 2014

Thread Tools Display Modes
Old 15-02-19
Zigmeister Zigmeister is offline
Junior Member
Join Date: Jul 2018
Location: Sunshine Coast Qld
Posts: 3
Default Engine Watchdog Installation

Iíve just finished installing the Engine Watchdog TM4 which will monitor the engine temperature as well as the Auto gearbox temperature. I decided to mount the unit in that otherwise useless box just under the climate controls. The unit was a bit high however by removing the original lid and replacing it with some thinner plastic which fitted inside the frame, it fitted right in. I slid the temperature sensors out through the main grommet on the passenger side firewall and attached them as per the photos. There were existing unused bolt holes in both locations. 6mm on the engine and 8mm on the gearbox. I also fitted a couple of extra cig lighter sockets with their own separate power supply to provide power for my Dashcam as well as the Watchdog. I replaced the original Watchdog cig plug with one that has an internal fuse so I could protect the system with the 1 amp fuse they stipulate. Thanks to Denmonkey for the videos on how to pull the dash to bits. I broke/lost a few of the white clips part number MR402859 but the local dealer had some so it wasnít a problem. And thanks to all the posters on this site for tips on where to place the sender units and for ideas on power tapping.
Attached Images
File Type: jpg 20190210_150346.jpg (70.4 KB, 79 views)
File Type: jpg 20190214_154232.jpg (122.1 KB, 85 views)
File Type: jpg 20190214_154956.jpg (135.1 KB, 79 views)
File Type: jpg 20190214_154554.jpg (116.6 KB, 83 views)
File Type: jpg 20190214_154909.jpg (107.0 KB, 79 views)
File Type: jpg 20190214_154322.jpg (113.4 KB, 70 views)
File Type: jpg Clip MR402859.jpg (104.3 KB, 67 views)
Reply With Quote
Old 30-05-19
Bungle Bungle is offline
Junior Member
Join Date: Aug 2012
Location: Perth
Posts: 3

Thanks for the part number of the white clips!
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine and Transmission WatchDog Ocean Generation 3 Pajero 24 14-04-18 11:29 AM
Firewall grommet for engine Watchdog in NX Drjohn11 Generation 4-4 Pajero 4 26-04-16 09:39 PM
Engine Watchdog says I have a cooling problem GHendo Generation 3 Pajero 30 04-04-15 10:04 AM
Electric fan & Engine Watchdog BeanCounter Generation 2 Pajero 9 09-09-13 02:01 AM
Engine watchdog TM4 twin sensor mmannion Electrical / Radios 12 31-03-13 05:34 PM

All times are GMT +10. The time now is 05:27 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.