I was replacing all the springs and shocks with Bilstein/kingspring. I knew rear arms needed bushes replacement because setting bolts were stacked by rust.
I tried to "unlock" the front setting nuts and there were clear on the left side, but stuck at right. I had to cut them through the bushes...
And now, I'm fighting with everything to get this arm out.
Is there a way to get it out WITHOUT unfitting the transmission arm from the HUB?
Thank's all
I tried to "unlock" the front setting nuts and there were clear on the left side, but stuck at right. I had to cut them through the bushes...
And now, I'm fighting with everything to get this arm out.
Is there a way to get it out WITHOUT unfitting the transmission arm from the HUB?
Thank's all
Comment