Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 4-1 Pajero

Generation 4-1 Pajero NS Model 2006 - 2009

Reply
 
Thread Tools Display Modes
  #1  
Old 13-01-20
2freeq 2freeq is offline
Member
 
Join Date: Apr 2011
Location: Wollongong
Posts: 137
Default EGR blanking plate Vs EGR Off Module Vs Resistor Mod

Which is the better option for a 2008 NS 3.2L

EGR Blanking plate - $10 eBay
EGR Off Module - $88 chip tuning
Resistor Mod - $1 - Jaycar

With any of these do you still need a catch can?
__________________
Currently Own
- 2008 NS 3.2L TD - Smart Bar, Warn winch, Kings spot lights, Dual batteries, UHF, Roof basket, Kings Awning, AT tyres + more to come!
- 2006 NP 3.8L - Alloy bullbar, Spotlights, Ironman 2" lift, UHF, AT tyres

Previously Owned
- 1992 NH 2.5L TD - Bullbar, Winch, Roof basket, UHF, AT tyres
Reply With Quote
  #2  
Old 13-01-20
HeavyPizzaz HeavyPizzaz is offline
Valued Member
 
Join Date: May 2017
Location: Sydney
Posts: 854
Default EGR blanking plate Vs EGR Off Module Vs Resistor Mod

EGR module and resistor mod does the exact same thing.

These can both be reversed in less time than a blanking plate. The module can obviously be reversed in 2 minutes, the resistor a little longer.

EGR mod solves the problem of exhaust soot mixing with oily air, but I think the catch can still helps prevent oily coating in Intercooler etc so still of benefit in that regard.


Sent from my iPhone using Tapatalk
Reply With Quote
  #3  
Old 13-01-20
nj swb's Avatar
nj swb nj swb is offline
Resident
 
Join Date: Jun 2007
Location: Adelaide
Posts: 6,338
Default

Quote:
Originally Posted by HeavyPizzaz View Post
EGR module and resistor mod does the exact same thing.

These can both be reversed in less time than a blanking plate. The module can obviously be reversed in 2 minutes, the resistor a little longer.

EGR mod solves the problem of exhaust soot mixing with oily air, but I think the catch can still helps prevent oily coating in Intercooler etc so still of benefit in that regard.
This.
__________________
NT Platinum. DiD Auto with 265/70R17 Toyo MT, Lift, Lockers, Lockup Mate, Low range reduction, LRA Aux tank, bull bar, winch, lots of touring stuff. Flappy paddles. MMCS is gone!

Project: NJ SWB. 285/75R16 ST Maxx, 2" OME suspension, 2" body lift, ARB 110, 120l tank, bullbar, scratches, no major dents. Fully engineered in SA. NW DiD & auto in place - a long way to go....

Scorpro Explorer Box
Reply With Quote
  #4  
Old 30-01-20
carnut1100 carnut1100 is offline
Junior Member
 
Join Date: Jun 2019
Location: brisbane
Posts: 33
Default

As above, catch can is still worthwhile.

I found the resistor mod pushed fuel consumption up a bit, and altered the boost behaviour...Iím taking it back out.
Coding the EGR off with a remap is the best solution...
Reply With Quote
  #5  
Old 30-01-20
ironrock ironrock is offline
Junior Member
 
Join Date: Mar 2019
Location: India
Posts: 36
Default

ohh i was about to do the resistor mod, but the above statement got me thinking, does the egr blanking really affect fuel economy ?
Reply With Quote
  #6  
Old 30-01-20
Ian H Ian H is online now
Valued Member
 
Join Date: May 2015
Location: melbourne
Posts: 1,803
Default

No discernable difference in performance or fuel economy that I can see or feel in my NX with the SPV mod (same the same as the resistor method). The benefit of clean air going in because the EGR is closed 100% of the time makes it a great mod. I've done just over 100k now and I'd be taking gunk out of a very chocked up inlet manifold if it wan't for that mod.
__________________
2015 NX GLS, Factory alloy bar, Kings HD Springs & Koni Shocks with 50mm lift, MM Auto Mate, Paddle shift kit, dual batteries with Redarc DC/DC, LRA 58L tank, Safari snorkel, Boo's bash plates (full set), 17" steels with BFG KO2's, Drifta drawers with slide, TPMS, Uniden UH8080S, Alpine iLX-702D head unit. Goldstream caravan and a TVan Firetail.
Reply With Quote
  #7  
Old 21-06-20
Markts58 Markts58 is offline
Junior Member
 
Join Date: Feb 2015
Location: Granton Tas
Posts: 5
Default Resistor Mod

Hi All
After reading about this cheap modification (adding resistor to Black-Blue wire) I thought well why not try it?
I went to jaycar and bought the 8 pack for 55c ( 4.7 ones) and did the solder job last week.
Now i was very skeptical at this cheap mod but i thought well ill give it a go anyway... whats the worst that can happen.? If it does not work then ill just reverse it .
On the weekend I went to our business which is 180K away from where we live and on the way there i did not really take any notice of fuel economy and upon arrival I had around 1/4 to 1/2 Tank of fuel.
Today when leaving I filled up at our local Service station and set off.
First thing i noticed was my range had shot up from 600 - 700 Ks to empty to 980 Ks ! Hmmm Interesting . During the return trip the fuel gauge hardly moved and upon arriving home I had 820 Ks range showing. The fuel guage was sitting between full and 3/4 . Coincidence? No ! Many other times i have done same journey it usually taken around 1/4 to 1/2 tank each way . And range usually shows around 500 Ks remaining.
Whoever thought of this mod needs some recognition, Because to me this is nothing short of Phenomenal.
Maybe My vehicle ( 2011 RX Diesel) is just a one off as far as this is concerned but its really amazing.
I would like to hear if anyone else has had similar experience?
I always regretted selling my 2003 NM diesel to buy a Grand cherokee (diesel) because it was such a reliable bloody fantastic car. The jeep was really good , Dont get me wrong but let down by reliability issues.
So now I have gone back to another Paj which i purchased around 6 months ago and was a bit disappointed with the fuel economy compared to my old NM.
Now i'm starting to smile again (ear to ear)
The NT is great (dash rattles fixed) and is now living up to my expectations.
What a shame Pajeros are going to be discontinued
Wifes car is a 2015 outlander and she is very happy with it. (her 2nd one)
Reply With Quote
  #8  
Old 21-06-20
bb2wa bb2wa is online now
Member
 
Join Date: Apr 2018
Location: Perth
Posts: 52
Default

Quote:
Originally Posted by carnut1100 View Post
As above, catch can is still worthwhile.

I found the resistor mod pushed fuel consumption up a bit, and altered the boost behaviour...Iím taking it back out.
Coding the EGR off with a remap is the best solution...
I found 12% less fuel consumption with egr mod.
__________________
2009 NT DID Platinum, CR5002HP air bags, KYB Skorched 4s shocks, std springs.
Reply With Quote
  #9  
Old 10-07-20
kiwi horan kiwi horan is offline
Junior Member
 
Join Date: Sep 2014
Location: Melbourne
Posts: 47
Default

I've got 2008 NS Exceed
Blanking plate cause an intermittent error

Turbo pressure would fail and go into limp mode
Turn off - restart .. would run fine with engine light on, very occasionally the code would clear itself,
Used a scantool to clear
Same result as above, would come and go
__________________
Pajero NS 2008 Exceed MY07
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
EGR Blanking plate NW Damian69 Generation 4-3 Pajero 520 21-05-18 11:40 AM
EGR blanking plate AJC Generation 3 Pajero 115 26-02-17 02:18 PM
EGR Blanking Plate sandgroper 123 Pajero Sport QE 2015 - 2019 56 17-12-16 09:18 AM
EGR blanking plate garycromp PB -PC Challenger 2009 - 2014 12 03-02-14 12:43 PM
EGR blanking plate.. pajman92 Generation 3 Pajero 5 21-10-13 07:58 AM


All times are GMT +10. The time now is 11:57 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.