Tweet
HI Guys. i`m new to the club,i have a 2014 challenger pc would appreciate any advice on the best way to get a wiring loom from the engine bay into the cabin. i`m wiring a LED light bar.Thanks Con
-
-
Hi Conor,
Locate the large rubber boot/bonnet on the passenger side firewall. Push a greased piece of wire through this boot into the passenger side foot well. If you then tape your LED harness to the other end and then lube the loom with some silicon grease you should be able to easily pull the loom through the boot using the wire.2011 Challenger 30th Anniversary Manual , OEM nudge bar , GME 3100 UHF , seat spacers , OEM tow bar , Rydge Ryder Awning , Dueler 265/65/17's , Munji egr , Ultragauge , ABR Sidewinder Flyer dual battery box , TJM Gold 4000 suspension , Plazmaman Intercooler hoses , Stedi ST4K 28'' light bar , 2 Stedi 7'' Type X , Pedders 5899 cones , Provent 200 catch can . -
thanks mate.. i thought as much . conComment
Comment