Tweet
Free Wheeling Locking Hubs - How can I remove the Snap Ring with only flathead screwdrivers? I can easilly run down to Autobarn but they are closed.... D'OH!
-
-
If you don't have circlip plyers I've found normal pilers can do the trick, just pull them out rather than squeeze in.. oh and make sure you drap a cloth over your hands/circlip or its almost guarenteed to go flying!Originally posted by rancox265 View Post1995 GLS 3.5, optioned to the shhizam with just couple of mods
-
2 flat heads. one to hold it still at the opening the other (real small one) to pry it over the lip always works for me94 NJ 3L Auto StockerComment
-
I just use a small flathead screwy. A large flathead and just stick it in the gap and turn works as well.97' NK 3ltr GLX LWB Manual | 3" lift | Wildcat headers | K&N air filter | 2.8 crawl gears | 4Terrain clutch | 2.25" exhaust | Factory locker rear | TJM 10,000lb winch | TJM snorkel
97' NL GLS LWB Auto | 6G75 3.8ltr | Redback HeadersComment
Comment