Its probably been covered before but will a NS-NT bullbar fit on an NW?
Below Nav Bar Ad Module
Collapse
NS-NT Bullbar for NW
Collapse
X
-
Ask the seller to send you a photo of the manufacturer's plate on the bar - it will give you all the details.
Also check all fittings, bolts, black plastic guard infills, etc are included, as some people don't take the time to remove everything properly.Pajero NX MY21 GLS
Comment
-
-
Simple answer is yes, I have one.
See if you can get a picture of everything included and I will check if its complete for you
Jim2013 NW GLX-R Factory Locker, TC mod,Dual Battery, 240V inverter, Anderson Plug, Fire Extinguisher. GME TX3500 UHF Radio, MM Alloy Bar, ORU 12000lb Winch,EGR mod, Fancy wheels, 33" Pirelli ATR Tyres, LRA Aux tank, Custom bash plates & Rock sliders, Ultra Gauge, ARB Compressor, LED Light bar, little mods around the cabin. Kings Std Ratecoils & Ultimate Shocks, Firestone HP airbags, Airteck Snorkel, Hema 6. Towing: Starcraft outback
Comment
-
-
The complete kit (I hope I remember it all) includes the bar, 2 rubber flares for the sides, 4 brackets to mount the bar onto the chassis, 4 bolts, nuts & washers and a template to drill the holes in the chassis in the correct place. And, of course, instructions on how to do the job.
I remember that drilling one of the holes was a bit awkward, but other than that, it was all straight sailing. They recommend screwing the ends of the rubber flares to the main flare, but supplied no screws for it. I didn't fit screws initially, but have now done it to keep the rubber in position better.
Comment
-
-
If your not going to buy it, how much do they want for it & where is it?
Steve2009 NT VRX, Rear Battery Pack, 18" Bridgestone D-697, SPVi EGR mod, BushSkinz Intercooler & Sump Plates. BOO's Transmission & Transfer Case Plates. GME 3550, HID HB's and 22"LED Bar, Pioneer Avic F80DAB Audio/Coms/Nav system MM4x4 TC Lockup Mate. & 1/2 tank of Diesel
Pretty Stock but very Capable
Wish List: ARB Deluxe Bar & Winch, Snorkel, Diff Breathers, & 1/2 tank of Diesel
Comment
-
-
Don't know where you are or the bar is, but if you are going to get it freighted, check out the costs before you buy it. I got stung badly by TNT freight. Cannot remember what it was, but I was quoted about $80 and it finished up being over $200. Not happy...
Comment
-
Matched content
Collapse
Comment