Below Nav Bar Ad Module

Collapse

Wastegate operation / full boost rpm

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • SOO732
    Junior Member
    • Apr 2018
    • 1
    • Crestmead

    Wastegate operation / full boost rpm

    Gday all,

    Anyone know if the wastegate actuator / rod on a manual should be moveable by hand when the car is off? I can’t move mine at all. And what rpm I should be seeing full boost, I’m seeing full boost at 3000rpm, feeling like a ramp rather coming on like a turbo should.

    It feels low on power, no fault codes, no soot. I’ve had a manifold clean done, fitted a provent and munji cable. All fresh filters.

    I’ll be checking all vac / boost lines this weekend and cleaning maf/map.

Matched content

Collapse
Working...
X