My old 2005 Verada had follow me home lights. My older 1995 Verada had an aftermarket unit for the follow me home light.
Below Nav Bar Ad Module
Collapse
Door trim removal and handle LEDs
Collapse
X
-
-
-
for ambient lighting replace the interior 8w festoon bulbs with leds.One of mine blew so i went hunting and founs all the replacements were 10 w.They get too hot to touch as it is(the 8 w festoons) so i did some leds instead.Much brighter.
LED on the right std on the left.Easy to do you need a festoon 31 mm festoon led2009 NT GLS(NZ) diesel LWB auto
BFG AT,Rhino Rack Vortex Bars,Foxwing Eco Awning,BUSHSKINZ I/C, sump guards and steps
"do not check the button for faster communication, this will throw a wobbly with some dongles"
Comment
-
-
Originally posted by KiwiNTPajero View Postfor ambient lighting replace the interior 8w festoon bulbs with leds.One of mine blew so i went hunting and founs all the replacements were 10 w.They get too hot to touch as it is(the 8 w festoons) so i did some leds instead.Much brighter.
LED on the right std on the left.Easy to do you need a festoon 31 mm festoon led
Comment
-
-
Originally posted by vladguan View PostMy old 2005 Verada had follow me home lights. My older 1995 Verada had an aftermarket unit for the follow me home light.NX GLS MY16 Auto: MM Towbar | Spare Lift Kit | Cooper ST MAXX 265/65R17 | SPVi Module mk3.1 | Autosafe Half Cargo Barrier | Torque Pro App | Donaldson 3um 2ndry Fuel Filter | Diff Breathers | GME4500 UHF | Rhino Rack Pioneer Platform | Roley's Rear Bash Plate | Bushskinz Underbody Protection | Airtec Snorkel | Onboard Compressor | Awning | ARB Deluxe Bar | Lightbar | Sherpa4x4 Winch | Bushskinz Sidesteps | Masten TPMS
Build Thread
Comment
-
-
Me again.
Just installed another led to centre console glove box. Helps finding things while driving without putting the interior lights on.
To do this you need to remove two screws in the bottom of the console. Then remove cup holder by using a small flathead screwdriver with cloth over it. Pry it up in the corners. Then there 4 screws. Undo these and the console can be removed. Few plugs to unclip and away you go.
Once removed from the car I flipped it over and removed the upper trim to get the led up as high as I could.
[IMG][/IMG]
Comment
-
-
What do I search for in ebay to find these let's that you use in this post?
Live in Norway do ebay is my main suplyer of ledMy Youtube channel with excavators and repairs
Youtube.com/minimachines1
Comment
-
-
Question re the resistors used.
Im going to do the door handle ambient lighting mod on my NS after reading this......will be getting the orange leds, bezels and resistors from Jaycar.
Trying to work out which resistors to use and according to online calculators it should be a 390ohm .5w one...........does this sound ok?2014 VW Touareg V6 diesel
Previously
88 NF Exe SWB 2.6 manual
92 NH Gls LWB 3.0 auto
92 NH J-Top 2.5 manual
99 Landcruiser Gxl 4.5 manual with all the fruit
95 NJ Gls SWB 3.0 auto
08 NS Vrx SWB 3.2 auto
Comment
-
-
Just saying a big thanks to green troll for the write up re the door ambient lighting mod.
Finally did this to my NS this weekend although I only put them on the door grab handles and not in the door release handles as found just the one bright enough.
I used these with built in resistor
Along with these from Jaycar
Cheers2014 VW Touareg V6 diesel
Previously
88 NF Exe SWB 2.6 manual
92 NH Gls LWB 3.0 auto
92 NH J-Top 2.5 manual
99 Landcruiser Gxl 4.5 manual with all the fruit
95 NJ Gls SWB 3.0 auto
08 NS Vrx SWB 3.2 auto
Comment
-
-
Originally posted by Pajshomoneroguntero View PostI roll my eyes that a $50K+ car doesn't have lights on these switches. Bloody lights in the footwells though, why the hell do I need to see my toes in the darkMike R. Sydney. Pajero GLS NX Silver Jan15. DiD Auto. STILL grossly disappointed with the errors in Speed Limits on major roads in my TomTom.
Comment
-
Matched content
Collapse
Comment