Hi Guys,
I have recently purchased a kings light bar and 9 inch plug and play unit.
Due to having H9 globes i had to source a H9 adapter.
The issue, I have set up the unit, installed the lights and run the wiring sadly the rookie car person i am didn't test the circuit before i installed it.
Basically the power runs into the relay/junction box form the battery. Power is running to the switch inside the cabin. The high beams are working. However the light bar and spot lights don't activate.
I have changed the junction box to the spare still the same issue.
I have used a second plug and play kit and still the same issue.
Is there an easy fix? Has anyone had the same issue? Any help would save me from loosing the rest of my hair!!
Ive inserted a paint diagram of it
Thanks Dave.
I have recently purchased a kings light bar and 9 inch plug and play unit.
Due to having H9 globes i had to source a H9 adapter.
The issue, I have set up the unit, installed the lights and run the wiring sadly the rookie car person i am didn't test the circuit before i installed it.
Basically the power runs into the relay/junction box form the battery. Power is running to the switch inside the cabin. The high beams are working. However the light bar and spot lights don't activate.
I have changed the junction box to the spare still the same issue.
I have used a second plug and play kit and still the same issue.
Is there an easy fix? Has anyone had the same issue? Any help would save me from loosing the rest of my hair!!
Ive inserted a paint diagram of it
Thanks Dave.
Comment