Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > General Information > Ongoing Projects that benefit members

Ongoing Projects that benefit members Projects from members than can be purchased at the right price.

Reply
 
Thread Tools Display Modes
  #251  
Old 01-05-18
dbdb dbdb is offline
Senior Member
 
Join Date: Aug 2008
Location: Adelaide Hills
Posts: 294
Default

Quote:
Originally Posted by vladguan View Post
Hmm... Have you checked the wheel sensors to make sure they are clean and not damaged? Have you driven through mud/sand recently etc?
No obvious damage and not done anything lately to cause any, and normally clean, again no recent mud of sand. I've put a thread up in 4.3 seeking advice, I just thought I'd pick your brain, I really can't imagine how the TC mod could impact it. May have to disconnect to check, but I'd rather not have to pull the dash apart.
__________________
14 NW GLX-R automatic, dual battery, Icom 440 UHF, redarc tow pro, home made drawers, Bushskinz bash plates, light bar, billies & lovells, ARB bull bar and other stuff.
04 NP GLX now gone
Reply With Quote
  #252  
Old 07-06-18
Dutch68 Dutch68 is offline
Junior Member
 
Join Date: May 2018
Location: Adelaide
Posts: 8
Default

Quote:
Originally Posted by vladguan View Post
OK. The last two have been sold. I have time to make more so post it here if you want one. Need at least 3 to go ahead.

I can also make it pre-wired. This includes a switch (or two if you prefer), fuse tap with a fuse and wiring. Cost depends on type of switch etc. For example, a TC on and off loom with a Jaycar SPDT rocker switch (one with the green and red LEDs) will be $120 plus $10 postage.
Gday vlad, put me down for one of the pre-wired ones with the jaycar SPDT rocker switch please. Thanks
Reply With Quote
  #253  
Old 07-06-18
vladguan's Avatar
vladguan vladguan is online now
Valued Member
 
Join Date: Mar 2015
Location: Adelaide
Posts: 2,419
Default

Dutch68, since I am ordering a new plug fore dbdb, I can add your order to it.


Let me know what you want and I will PM you payment details:


TC ON/OFF is $85
TC ON or Off is $85


Prewire with the TC ON/OFF is $135


Postage is $10.
Reply With Quote
  #254  
Old 07-06-18
Dutch68 Dutch68 is offline
Junior Member
 
Join Date: May 2018
Location: Adelaide
Posts: 8
Default

Gday vlad,
I sent a PM with some questions before I had seen this, sorry mate.

Last edited by Dutch68; 10-06-18 at 09:16 AM.
Reply With Quote
  #255  
Old 10-06-18
reciprovac reciprovac is offline
Member
 
Join Date: Jan 2011
Location: Kilmore, Victoria, Australia
Posts: 212
Default nw purchase

Vlad,
Sorry to contact you this way but unsure how to contact you direct,I am interested in purchasing the Traction control on with Diff lock engaged complete with illuminated switch.
How do I go about this ?
Regards Reciprovac.
__________________
2013 Pajero GLX-R auto Diesel.
Tough dog 40mm raised suspension,ARB shocks,MCC bull bar,electric winch,bash plates,draws , engel fridge,dual batteries,air comp,water tank and electric pump,inverter,DC/DC charger,air bags, converter lock up system.
Reply With Quote
  #257  
Old 19-06-18
dbdb dbdb is offline
Senior Member
 
Join Date: Aug 2008
Location: Adelaide Hills
Posts: 294
Default

Quote:
Originally Posted by dbdb View Post
No obvious damage and not done anything lately to cause any, and normally clean, again no recent mud of sand. I've put a thread up in 4.3 seeking advice, I just thought I'd pick your brain, I really can't imagine how the TC mod could impact it. May have to disconnect to check, but I'd rather not have to pull the dash apart.
I ended up pulling out the TC mod loom, problem solved. A couple of the wires in the loom were loose in the pins so not contacting properly. Vlad re-made the loom, looks better than new.

I'll re-fit it in the next couple of days, great service from Vlad.
__________________
14 NW GLX-R automatic, dual battery, Icom 440 UHF, redarc tow pro, home made drawers, Bushskinz bash plates, light bar, billies & lovells, ARB bull bar and other stuff.
04 NP GLX now gone
Reply With Quote
  #258  
Old 30-06-18
Dutch68 Dutch68 is offline
Junior Member
 
Join Date: May 2018
Location: Adelaide
Posts: 8
Default

Thanks vlad. The tc patch loom arrived and looks amazing. Thanks again great work. can’t wait to put it in and try it out.
__________________
BLACK 2009 NT VRX DiD AUTO - “RAGGEDY ANN” -
ARB deluxe Sahara bar, IPF 900xs spotlights, Dual batteries with REDARC isolator, REDARC Tow-Pro brake controller, RHINO-RACK vortex roof racks. $1 resistor egr mod, power window mod.
Reply With Quote
  #259  
Old 1 Week Ago
damienpajero damienpajero is online now
Junior Member
 
Join Date: Feb 2018
Location: perth
Posts: 16
Default

Hi

Thanks for creating this awsum mod I just have a couple of questions

would like to know if the loom is good with an np 2006? no rear diffs (yet)?

would it be worth getting the 3 way switch if I wanted to get lockers in the future?

I also have a problem that started after my battery died where I have 3 dash lights that ares stuck one guy mentioned the 3 in a previous comment where by they came on when the traction controll off swich was switched on I cant remember atm I have resorted to leaving it for dealer to sort out but I am working at karijini for the next 3 months.

if all is well I would like to grab the pre soldered kit that you think is best considering I may want some shiny new rear lockers in the future.
Reply With Quote
  #260  
Old 1 Week Ago
vladguan's Avatar
vladguan vladguan is online now
Valued Member
 
Join Date: Mar 2015
Location: Adelaide
Posts: 2,419
Default

Quote:
Originally Posted by damienpajero View Post
Hi

Thanks for creating this awsum mod I just have a couple of questions

would like to know if the loom is good with an np 2006? no rear diffs (yet)?

would it be worth getting the 3 way switch if I wanted to get lockers in the future?

I also have a problem that started after my battery died where I have 3 dash lights that ares stuck one guy mentioned the 3 in a previous comment where by they came on when the traction controll off swich was switched on I cant remember atm I have resorted to leaving it for dealer to sort out but I am working at karijini for the next 3 months.

if all is well I would like to grab the pre soldered kit that you think is best considering I may want some shiny new rear lockers in the future.
Hi,
Sorry, for then 4 only. Gen 3 uses different plugs, PCB headers and pins and had different schematics. As for the lights, best to take it to the dealer to check and clear it unless you have access to a MUT tool.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
fog light loom nw neilo Generation 4-3 Pajero 3 25-01-16 08:07 AM
Need some wiring loom help :/ Pajo26 Generation 2 Pajero 0 06-02-14 01:54 PM
ipf wiring loom lukeferg Electrical / Radios 0 06-02-13 12:21 PM
Loom Interchangeability valitank Generation 2 Pajero 3 26-12-12 10:29 PM
patch Shogun 2000 General Info 0 23-05-12 09:07 PM


All times are GMT +10. The time now is 11:12 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.