4wd gps thoughts

[Dicko1]

...and you still get lost mate.

Hey....I represent that remark!!!

[Herman4x4]

My tasblet is mounted with homemade extension arms resting on the dash and attached to a large suction cap on windscreen.

Gday Dicko,
Any current you can post a couple of photos as I am looking at his too mount a tablet.
Cheers,
Andrew

[Dicko1]

Gday Dicko,
Any current you can post a couple of photos as I am looking at his too mount a tablet.
Cheers,
Andrew

1.jpg 2.jpg 3.jpg 4.jpg 5.jpg I,ve had it on some badly corrugated roads and there is some wobble there. If it gets too bad I just unhook from the holder. Works perfect on all bitumen roads. I could modify to make it shake less but its ok for me.

[Herman4x4]

Thanks for that. Looks good. It is stuck to the dash at all?

[Dicko1]

No its not. Its heavy enough to sit there on its own weight. If you really wanted a better system then a double suction cup would be the go....https://www.mrmobile.net.au/ram-moun...-with-universa

This setup would allow for a heavier duty connecting rod to the rear gps mount.

[Herman4x4]

Thanks for that. Looks like i will give the one sucker a go.
Cheers,
Andrew

[Ian H]

I use an 8" Samsung tablet mounted by velcro tabs over the existing information screen which I hardly ever use. Mounted this way it's easy to remove and has never looked like coming off over some bad corrugations and high country tracks. I run Ozi Explorer using the free 25k resolution maps available from Get Lost Maps.

tablet mount.jpg