Below Nav Bar Ad Module

Collapse

Common rail fuel pressure

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • craka
    Valued Member
    • Jun 2009
    • 2057
    • Newcastle (Newie)

    #16
    Originally posted by erad View Post
    I have looked up my W/S manual (Russian CD) and it is complicated.


    With engine CW temp @85 to 95 Deg C, transmission in neutral and all lights off, the common rail target pressure is 20 - 35 MPa at idle speed. Press the accelerator slightly and the pressure should increase (the amount would vary according to how hard you press).


    The rail pressure sensor will bring up code PO191, 192 or 193 if the rail pressure varies by more than +/- 10 MPa.


    4000 psi equals 27.56 MPa and 4500 psi equals 31MPa
    Thanks Erad, I couldn't seem to find it in the manual.

    Well all seems to be normal than as I'm between those two ranges at idle, and fuel pressure increase as the accelerator is pressed.
    NS SWB X 3.2DiD - Factory locker, Hella spotties, GME UHF, 2" lift

    Retired: 1991 NH SWB 3.0L V6 5sp Manual, Mickey Thompson ATZs, GME UHF TX3200.

    Comment

    • Seigried
      Valued Member
      • Apr 2016
      • 732
      • brisbane

      #17
      My NS idles at ~4500psi.

      Sent from my SM-G900I using Tapatalk

      Comment

      Matched content

      Collapse
      Working...
      X