Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > General Information > Do It Yourself Projects

Do It Yourself Projects Anything that you have made up yourself. Rear storage systems etc

Reply
 
Thread Tools Display Modes
  #1  
Old 10-04-19
Dongskie2's Avatar
Dongskie2 Dongskie2 is offline
Member
 
Join Date: Dec 2016
Location: Manila & Berwick
Posts: 142
Default RHD to LHD Refresh

I got myself an old gen2 swb Japanese unit and already converted to LHD from the previous owner.

Most of the wires have need modded to reach the left side and many of then had been done in haste and resulted in poor contacts and loose connections.

The A/C blower and evaporator too had been entirely replace with a Toyota unit and the air ducting was in shambles.

I've done about 70% of the electricals repairing the joints and soldering them for a secure contact.

I am now working on making a new ducting system form the right side to the middle and the driver's vent area.
Attached Images
File Type: jpg 20190404_124037.jpg (162.0 KB, 30 views)
File Type: jpg 56580522_283422169250070_2515623660220317696_n.jpg (82.7 KB, 39 views)
File Type: jpg 56732721_272990556986458_4406932046820147200_n.jpg (93.4 KB, 38 views)
__________________
Nothing beats Doing It Yourself.... Tuned 4M40 and 4D56T WIP
Reply With Quote
  #2  
Old 10-04-19
Patagonia's Avatar
Patagonia Patagonia is online now
Valued Member
 
Join Date: Dec 2009
Location: Santiago, Chile!!!!!
Posts: 811
Default

I would start by checking if all the steering parts modifications were well made, I've seen very dangerous adaptations
__________________
2000 SWB NL 3.5 SOHC V6 AT.
Adjustable suspension, Rear Locker, Suspension Seats, Cruise Control, 8500 Lbs winch, all factory fitted.
31x10.5R15 Pirelli ATR?s and forever thinking on the lift.
2009 SWB NS 3.2 DOHC DID AT 265/70/17 BFG AT/KO, OME SD Springs +4 Rear locker, 8.500 Lbs Winch...new toy!!!
Reply With Quote
  #3  
Old 12-04-19
Dongskie2's Avatar
Dongskie2 Dongskie2 is offline
Member
 
Join Date: Dec 2016
Location: Manila & Berwick
Posts: 142
Default

Quote:
Originally Posted by Patagonia View Post
I would start by checking if all the steering parts modifications were well made, I've seen very dangerous adaptations
You are perfectly right on!

On this the nuts and bolts have loosen on the steering box to chassis, and the steering was wobbly when I got it. At first look they seemed tight and secured, but when I drove it the car would wander from lane to lane hahaha.

Fixed now with a new set of bolts and nuts and a welded over steel plate over the chassis for the steering box platform.
__________________
Nothing beats Doing It Yourself.... Tuned 4M40 and 4D56T WIP
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nl Pajero 300K refresh bigfella78 Generation 2 Pajero 8 13-10-17 10:44 AM
4D56T top end refresh....what else Qld_Panther Generation 2 Pajero 4 06-03-15 04:22 PM


All times are GMT +10. The time now is 12:11 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.