Instructions & Template for TJM Outback Bull Bar Steel NS/NT/NW

[09VRXDiD]

Hey Guys,
After a lot of searching, I finally got my hands on a set of installation instructions and cutting templates for the TJM Outback Steel Bullbar SKU: 070SB13N52U. It's for the NS, NT & NW. Although the instructions and bumper cut template say NS/NT.
Bumper cutting template needs to be printed on A3 sized paper, very important! .

Link to TJM's website here: http://www.tjm.com.au/en-oceania/pro...154&series=154

I'll be installing it on my car this weekend, so if you need any help, I'm more than happy to offer advice once I'm done.

Installation Instructions TJM Outback Steel Bullbar NS-NT Pajero #070SB13N52U LR2.pdf

Bumper Cut Template TJM Outback Steel Bullbar NS-NT Pajero #070SB13N52U.pdf

[Mromilio]

Thanks for your research.

Im looking at buying a used TJM T13 Bar with brackets, however no bolts, fog lights and blinker/ parkers.

My question is can these be purchased separately and how difficult is it to source these parts?

[09VRXDiD]

Blinkers and Parker's are easy, you can leds for them online. I used www.ultimateled.com.au for mine.
The mounting brackets and winch mount you'd want to make sure you have. The bolts vary in size from memory and are specific to each location. I'd recommend asking TJM for bolts, they were very helpful for me.

Sent from my SM-G950F using Tapatalk

[denmonkey]

I'm litterally half way through installing an ARB bar on my NT.

Next step is cutting the bumper.

The supplied indicators are an absolute joke.

I will be replacing them with these when I get a chance.

https://www.ebay.com.au/itm/2x-LED-FRONT-INDICATOR-PARK-CLEAR-AMBER-LIGHTS-LAMPS-ARB-TJM-BULLBAR-30V-VOLT-HK/162739308802?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

gives an LED parker and indicator in one where the original is indicator only and standard incandescent globe.

[Smurphy]

Do you think there are digital copies of the templates for the new TJM outback bullbar for the NX.