Below Nav Bar
Collapse
07 NS Shorty build
Collapse
X
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
-
-
Nice progress
Is there anything to stop the swing arm from swinging all the way around and hitting the rear side panel?NS SWB X 3.2DiD - Factory locker, Hella spotties, GME UHF, 2" lift
Retired: 1991 NH SWB 3.0L V6 5sp Manual, Mickey Thompson ATZs, GME UHF TX3200.
Comment
-
-
Originally posted by craka View PostNice progress
Is there anything to stop the swing arm from swinging all the way around and hitting the rear side panel?07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
Looks awesome and very professionalSilver NT VRX Di-D
ARB bullbar | snorkel | Bushskinz & Boo’s guards | UltraGauge MX | 2" lift | Cooper AT3 LT's | dual battery | Superwinch X9 | 80ltr diesel tank | 22ltr water tank | aux trans cooler | MM Lockup Mate | GME UHF | locker/TC mod | SPV EGR | rear LED work light | rhino platform | ARB awning | rear drawers ... & plenty of scratches
My Build Thread - HERE
Previously - NL Pajero (now owned by Forum member 'Gemster')
Comment
-
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
Neat work crusin!
Got any close up pics of the bar now that it’s finished, namely the corners and how the guard flare trimming ended up?
Next up - a full length set of scrub bars with incorporated rock sliders/sill protection?
Awesome looking setup!
Cheers
Bennie2005 NP DiD auto. The family bus. Dual batteries, snorkel, one side step, King Springs lift, Koni shocks, rear airman airbags, Provent catch can, 81L LRA tank (awesome!). Other rides: "Ruby Scoo" my lifted L series Subaru and my "Redback" Targa top Brumby - only mods are 5 poster bullbar and nicer dashboard from a coupe
Comment
-
-
Originally posted by El_Freddo View PostNeat work crusin!
Got any close up pics of the bar now that it’s finished, namely the corners and how the guard flare trimming ended up?
Next up - a full length set of scrub bars with incorporated rock sliders/sill protection?
Awesome looking setup!
Cheers
Bennie
I’ll get some photos once it’s tidied up a bit better.
The bar work is complete as I don’t want to ad any more weight. I’m actually looking into getting the ally underbody protection from bushskinz and selling my steel bushskinz.
Got tough dog rear shocks on the way. Should be a Sunday job.07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
Due to added weight I have had to upgrade my rear springs. basically I set the wagon up as a weekend warrior so it was never meant to hold this weight. So I got a set of efs 50mm lift 500kg constant springs to install
Also with the chip I have had my bypass open a few times so got a blocker:
And finally, a little more fuel storage:
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
Well the pressure is on to finish the rig. its got an adventure planned.
I started with upgrading the rear suspension.
I got some EFS coils which were a bust as per photo:
So I went by to my tried and true Dobinsons, these are 250kg constant load for a lwb or a fully prepped shorty.
Thats heaps better:
Engine is getting some work done, new alternator, resealing the intake and making a new egr block, I also have a catch can and water seperator to install still.
And the wiring never ends, hooking up the LED light bar, the winch is getting hard wired into a switch for easier use, and I have hooked up the dual battery system link kit. more photos when its all cleaned up
[URL=http://s85.photobucket.com/user/cruisn/media/NS%20pajero/IMG_4733_zpsgf2ogngu.jpg.html][IMG]http://i85.photobucket.com/albums/k48/cruisn/NS%20pajero/IMG_4733_zpsgf2ogngu.jpg[/07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
-
The work continues. suspension is in and looking great, along with the jerry can holder.
I can now carry about 160L which covers me for 1000kms regardless of terrain. or 1500 of highway at 95-100ish.
Also the electrical, new stereo installed, the ebay unit was killing the battery so now I have cleaned all that shit wiring up and installed a kenwood deck.
Before:
After:
And some poser shots:
07 Mitsubishi Pajero Shorty - Currently rolling around... Parked in Armenia for the moment
Insta: https://www.instagram.com/wrongturnadventure/
Website: https://wrongturn.com.au/
Comment
-
Matched content
Collapse
Comment