Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > General Information > The Bargain Store

The Bargain Store Tell us what is cheap ...cheap ....cheap!

Reply
 
Thread Tools Display Modes
  #1  
Old 1 Week Ago
ticky's Avatar
ticky ticky is offline
Valued Member
 
Join Date: Jan 2015
Location: Adelaide
Posts: 1,297
Default Scored

I had a pretty good weekend last weekend.

First off, I was given a Lacey Belt Sander. This is a wood working machine, my other expensive hobby.


Then on Saturday, I bought a 15CFM 3 cylinder Clisby Compressor (Pump Only) for $100. I need a 3HP motor to drive it, but I got a new one on Ebay for $167. $267 to upgrade from a 6CFM to a 15CFM, gotta be happy with that.
Attached Images
File Type: jpg lacey (2).jpg (66.5 KB, 43 views)
__________________
2009 NT VRX, Rear Battery Pack, 18" Bridgestone D-697, SPVi EGR mod, BushSkinz Intercooler & Sump Plates. GME 3550, HID HB's and 22"LED Bar, Pioneer Avic F80DAB Audio/Coms/Nav system MM4x4 TC Lockup Mate. & 1/2 tank of Diesel

Pretty Stock but very Capable

Wish List: SMART Winch Bar & Winch, Snorkel, Diff Breathers, & 1/2 tank of Diesel
Reply With Quote
  #2  
Old 6 Days Ago
Dicko1's Avatar
Dicko1 Dicko1 is online now
Valued Member
 
Join Date: Dec 2014
Location: here
Posts: 4,829
Default

Nice couple of light, portable bits of machinery Ticky....NOT. lol.




Sounds like you got a bargain for the pair. What sort of wood work will you use these for?
__________________
Modified 2014 NW owner. All the usual fruit.
Word of advice if heading to Cape York.....Dont believe the vegetarian crocodiles saying it is safe to swim!
Reply With Quote
  #3  
Old 6 Days Ago
GHendo's Avatar
GHendo GHendo is offline
Valued Member
 
Join Date: Mar 2012
Location: Northern NSW
Posts: 4,202
Default

Looks like a handy machine. I think I know what your next purchase will be a dust extractor.

Cheers

Geoff
__________________
03 NP Manual Di-D Exceed, 2" lift, Dobinsons Springs, Lovells Shocks, ORU Winch, ARB Bullbar, Scott's Rods 3" Exhaust, ARB Compressor, Rear Air Locker, Cooper S/T Maxx, Hella Rallye 4000 S/Lights, Pioneer AVH-X5850BT DVD/Tuner w/- Reversing Camera, Sensa Tyre monitor, Uniden UH8080NB UHF, Rhino Platform Roof Rack, Hema HN-7 GPS, Engine Watchdog, CouplerTec, CTEK D250S DC-DC Charger, Snorkel, Towbar.
Reply With Quote
  #4  
Old 6 Days Ago
ticky's Avatar
ticky ticky is offline
Valued Member
 
Join Date: Jan 2015
Location: Adelaide
Posts: 1,297
Default

Quote:
Originally Posted by GHendo View Post
Looks like a handy machine. I think I know what your next purchase will be a dust extractor.

Cheers

Geoff
Hey Geoff,

I have a Dust Extractor, and quite a few other woodworking machines. The Lacey Belt will need a bit of work before I have it up and running, it currently has a 3 phase motor on it, so that will need to be replaced. Ive drawn up my shed and my machinery on CAD and worked out a plan but it means emptying the shed and a major clean up. That's about 5 years over due.


A lot of my gear is on wheels so I can work in the carport in front of the shed, as the shed is only 6mx6m and it's full as.

Here's my plan. Im open to suggestions.

The Red blocks cant be moved, or cant be moved easily.
The Green blocks are all on wheels.


Steve
Attached Images
File Type: jpg shed layout.jpg (10.6 KB, 26 views)
__________________
2009 NT VRX, Rear Battery Pack, 18" Bridgestone D-697, SPVi EGR mod, BushSkinz Intercooler & Sump Plates. GME 3550, HID HB's and 22"LED Bar, Pioneer Avic F80DAB Audio/Coms/Nav system MM4x4 TC Lockup Mate. & 1/2 tank of Diesel

Pretty Stock but very Capable

Wish List: SMART Winch Bar & Winch, Snorkel, Diff Breathers, & 1/2 tank of Diesel
Reply With Quote
  #5  
Old 6 Days Ago
ticky's Avatar
ticky ticky is offline
Valued Member
 
Join Date: Jan 2015
Location: Adelaide
Posts: 1,297
Default

Quote:
Originally Posted by Dicko1 View Post
Nice couple of light, portable bits of machinery Ticky....NOT. lol.




Sounds like you got a bargain for the pair. What sort of wood work will you use these for?
Hey Dicko,

I do all sorts of stuff, from furniture to Garden boxes. Ive been doing woodwork for about 20 years but Im self taught. I'm a boilermaker / welder by trade so I have adapted my skills.

Last year, I started doing a couple of TAFE Courses. I completed Certificate 2 in Furniture Finishing and started Certificate 3 in Furniture Making. Continuing Furniture Making this year and starting Certificate 3 in Furniture Finishing.

Learning and enjoying the courses.

Steve
__________________
2009 NT VRX, Rear Battery Pack, 18" Bridgestone D-697, SPVi EGR mod, BushSkinz Intercooler & Sump Plates. GME 3550, HID HB's and 22"LED Bar, Pioneer Avic F80DAB Audio/Coms/Nav system MM4x4 TC Lockup Mate. & 1/2 tank of Diesel

Pretty Stock but very Capable

Wish List: SMART Winch Bar & Winch, Snorkel, Diff Breathers, & 1/2 tank of Diesel
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scored myself a beauty! EvanM Generation 1 Pajero 1 27-05-12 08:10 PM
scored a bargain off ebay!!! smokem Bolted on bits, factory and aftermarket accessories 16 20-04-11 11:09 AM


All times are GMT +10. The time now is 05:54 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.