Originally posted by bennyb29
View Post
Below Nav Bar
Collapse
Windscreen Washer Jet Upgrade
Collapse
X
-
-
-
Originally posted by HeavyPizzaz View PostYep, assuming they hadn’t been removed by a previous owner. I cut off the tabs (post #52 above) so it sit better and the washers haven’t budged since even without the tabs.
Sent from my iPhone using Tapatalk
mine appear to be missing...
any chance someone knows what that part number might be?
Comment
-
-
Originally posted by paceman View Posti have the honda washers, but didn't know that there was a seal there as well...
mine appear to be missing...
any chance someone knows what that part number might be?
The seal was on the factory Mitsu nozzles that I removed... might have been stuck to your washer nozzles and maybe you didn’t see them. I just cut the tabs off and reused them on the Honda ones, which didn’t come with any. Cheers.
Sent from my iPhone using Tapatalk
Comment
-
-
Just in case someone needs more detail.
I replaced mine a while back on my NW Pajero and oh what a difference!
Maybe I even posted here at the time on one of these many pages.
Anyway, took some shots at the time - these may help someone considering the change.
Shows old vs new and the part numbers & packaging..2014 NW MY14 3.2 DID GLX-R Auto. Champagne in colour!
MM Lockup mate. King KCRS-35 rear springs. Monroe Gas Magnum TDT rear shocks. 3M color stable tint all round. Spare wheel lift kit. 'Dynamat' in all doors and rear cargo area. Pioneer AVH-Z5150BT Head Unit. Upgraded Speakers. Rear (2nd row) USB outlet. Factory nudge bar with LED light bar. Provent catch can. LED interior lights. Rear cargo area twin Andersons and Merit socket. Anderson plug in rear bumper. 6 channel TPMS.
Comment
-
-
Originally posted by HeavyPizzaz View PostI just cut the tabs off and reused them on the Honda ones, which didn’t come with any. Cheers.
Sent from my iPhone using Tapatalk2014 NW MY14 3.2 DID GLX-R Auto. Champagne in colour!
MM Lockup mate. King KCRS-35 rear springs. Monroe Gas Magnum TDT rear shocks. 3M color stable tint all round. Spare wheel lift kit. 'Dynamat' in all doors and rear cargo area. Pioneer AVH-Z5150BT Head Unit. Upgraded Speakers. Rear (2nd row) USB outlet. Factory nudge bar with LED light bar. Provent catch can. LED interior lights. Rear cargo area twin Andersons and Merit socket. Anderson plug in rear bumper. 6 channel TPMS.
Comment
-
-
Originally posted by Keithyv View PostSame for me - Honda ones came with no seal...
Lucky I keep stuff...
Had the older nozzles and they had the rubber seals still on them...
Job for the weekend...
Sent from my iPad using Tapatalk
Comment
-
-
Re-hashing an old thread… but rather than starting a new one…
these Honda jets fit the NL Paj as well.
just put them on mine today.
A variety of pics attached showing both, with the rubber washer that needs to come off the old and go onto the new.
the Honda jets aren’t a 100% fit but they are close. The tiniest bit of bonnet cut-out is visible at the vehicle-forward edge, visible in one of the photos.
'99 NL Escape, Manual - Bullbar, roofrack, cargo barrier, D697LT, Tough Dogs, dual batts, rear draws, Narva 225 HID, UHF, led bar etc
Towing: 4.8m Savage Centurion half-cab w/75hp Mariner
'99 NL GLS SWB, Auto - Bullbar, D697LT, spotties, UHF, Koni adjustables & King springs.
Wanted: Adventure.
Comment
-
-
Originally posted by Alex86 View PostRe-hashing an old thread… but rather than starting a new one…
these Honda jets fit the NL Paj as well.
just put them on mine today.
A variety of pics attached showing both, with the rubber washer that needs to come off the old and go onto the new.
the Honda jets aren’t a 100% fit but they are close. The tiniest bit of bonnet cut-out is visible at the vehicle-forward edge, visible in one of the photos.
Fans about 1/3 way up windscreen
Brought mine from
Impex https://en.impex-jp.com/
$50 to $60 landed on my deskLast edited by Jasonmc73; 28-01-24, 05:36 PM.Mitsubishi Pajero NX MY16 GLS with Sand Grabba floor mats, Ultragauge, Automate & Paddle gear shifters with Vlads traction control mod, Nautia switch panel, ARB compressor, Redarc Tow Pro, Anderson plug, Bushskinz front & rear alloy plates, Kaon light duty cargo barrier & rear door table
Comment
-
Matched content
Collapse
Comment