Xxxx
Below Nav Bar
Collapse
Awning Question
Collapse
X
-
most awnings have a bolt which has a flat ,thin head(T bolt?) which is sized to slide in a groove in a cross rail.The cross rail is supported at both ends so does not exrt any torque(twist) on the roof rail and halves any load on each rail.
There is a thread here somewhere with a discusssion on this .It would be pretty easy to make up a flat mount with some u bolts to take a couple of normal bolts instead os the T bolts.The roof rails them selves are only plastic i think2009 NT GLS(NZ) diesel LWB auto
BFG AT,Rhino Rack Vortex Bars,Foxwing Eco Awning,BUSHSKINZ I/C, sump guards and steps
"do not check the button for faster communication, this will throw a wobbly with some dongles"
-
-
This is photo I found on forum, and I just copied it.Attached Files
Comment
-
Matched content
Collapse
Comment