Hi guys I have an nj 3.5 dohc did the rocker cover gaskets a month ago and it seemed to stop the leak for a week or so now I'm getting oil getting on to the front drive shaft only when engine running and spraying everywhere some weeks I go through a lot and then it seems line it's stopped for a week or so then oil goes down again any ideas would be much appreciated its doing my head in cheers Griefy
Below Nav Bar
Collapse
Oil leak
Collapse
X
-
Originally posted by P-E-T-E- View Postpics? have you estabished where the leak is coming from?
Comment
-
-
Are you blowing a lot of smoke too?
If so the filter in your rocker cover might be blocked and the pressure can't fully escape through the breather hose.'94 2.8TD, 2" lift, low mount winch, bullbar, roofrack, UHF, custom drawers, HID spotties, cam, GPS....
Password for all my files: downunder
Comment
-
-
^^ was going to suggest that... when you fitted the new gaskets did you tourqe the rocker cover down to specification?
and when you fitted the gaskets did you insert the gaskets into the covers first before fitting them back on.1999 NL WIDEBODY GLS TDI EXCEED
Comment
-
-
-
Originally posted by P-E-T-E- View Post^^ was going to suggest that... when you fitted the new gaskets did you tourqe the rocker cover down to specification?
and when you fitted the gaskets did you insert the gaskets into the covers first before fitting them back on.
Comment
-
-
I had a really good look today and found a round rubber seal of some sort at the back of the rocker cover between the fire wall it was ki led over and there was oil all over it not sure if this is a replacement part or not I pushed t back in as far as I could with my fingers I'll Check co again tomorrow to see if its stopped leaking
Comment
-
-
thats the rear cover oil seal, you need to remove the valve cover so it can be seated back into its housing. can,t just push it back with the cover on.NS 3.2 Diesel, Polor White , Black CSA Rims, HanKook Dynapro AT Tyres, 3 inch custom stainless steel exhaust with free flow Cat & Muffler, 50mm Lift, Old Man Emu Shocks and Springs, TJM Bullbar powder coated White, Custom 7mm Sump Guard & Transmission Guard, 8 inch LED Spotties plus 20 inch LED Light Bar, rear Reverse LED Light, ARB Roof Cage , Tiger11 Awning.
Comment
-
-
Originally posted by dolphin View Postthats the rear cover oil seal, you need to remove the valve cover so it can be seated back into its housing. can,t just push it back with the cover on.
Comment
-
-
Originally posted by Griefy39 View PostI had a really good look today and found a round rubber seal of some sort at the back of the rocker cover between the fire wall it was ki led over and there was oil all over it not sure if this is a replacement part or not I pushed t back in as far as I could with my fingers I'll Check co again tomorrow to see if its stopped leakingPajero NJ 3.5 V45w DOHC Manual.
Mods- Snorkel, LCD Mirror w/ Reverse Day/Night Camera, Ultrasonic Reverse Distance, King Cobra Stereo, S/S Tube Sidesteps, SMD Interior / Exterior Lights, Floodlights, Removable 12'' Enclosed Subwoofer, Alarmed (microwave / tamper / GPS), custom Carbon Fibre Window surrounds, Chrome mirrors covers, Electronic Rust protector, Bullbar, Rev 1.3 lifters & valves, flexible s/s heater & radiator hoses, silcone vacuum hose, Orange Racing hose, 4Terrain HD clutch.
Comment
-
-
Originally posted by Griefy39 View PostIs that a mistsubishi part no
Thanks for thatPajero NJ 3.5 V45w DOHC Manual.
Mods- Snorkel, LCD Mirror w/ Reverse Day/Night Camera, Ultrasonic Reverse Distance, King Cobra Stereo, S/S Tube Sidesteps, SMD Interior / Exterior Lights, Floodlights, Removable 12'' Enclosed Subwoofer, Alarmed (microwave / tamper / GPS), custom Carbon Fibre Window surrounds, Chrome mirrors covers, Electronic Rust protector, Bullbar, Rev 1.3 lifters & valves, flexible s/s heater & radiator hoses, silcone vacuum hose, Orange Racing hose, 4Terrain HD clutch.
Comment
-
-
This little sucker is getting force out under pressure I think I pushed it in yesterday and this morning it was pushed out
It was rubber side facing out there is also a breather hosexatctge top of the rocker cover on both sides so can't work out where the pressure is coming from
Any tips greatly appreciated
Griefy 39
Comment
-
-
Originally posted by Griefy39 View Posthttp://s1208.photobucket.com/user/fo...age-4.jpg.html
This little sucker is getting force out under pressure I think I pushed it in yesterday and this morning it was pushed out
It was rubber side facing out there is also a breather hosexatctge top of the rocker cover on both sides so can't work out where the pressure is coming from
Any tips greatly appreciated
Griefy 39Last edited by RedSector; 16-07-13, 04:39 PM.Pajero NJ 3.5 V45w DOHC Manual.
Mods- Snorkel, LCD Mirror w/ Reverse Day/Night Camera, Ultrasonic Reverse Distance, King Cobra Stereo, S/S Tube Sidesteps, SMD Interior / Exterior Lights, Floodlights, Removable 12'' Enclosed Subwoofer, Alarmed (microwave / tamper / GPS), custom Carbon Fibre Window surrounds, Chrome mirrors covers, Electronic Rust protector, Bullbar, Rev 1.3 lifters & valves, flexible s/s heater & radiator hoses, silcone vacuum hose, Orange Racing hose, 4Terrain HD clutch.
Comment
-
Matched content
Collapse
Comment