Andrews NS 2007

[Samoya]

Hi All
Been floating around for a little while so I thought I would say Hi officially
Firstly thanks to the forum for the great info from members and fixs here solved quite a few issues
Our Pajero is pretty stock a few mild enhancements it is mainly the brides drive but I got to say I goes like a shot duck probably give the 380 a run for its money
2007 NS GLS Petrol Auto 3.8 MIVEC 243k silver
Engine replaced by previous owner (new not secondhand) at 218k
We have owned the Truck for about 6 months
major service recently completed by me including
Fluids-Auto flush 15lt put through her,brake,coolant,power steer,diffs,engine oil and transfer
air filter, oil filter, cabin filter
machined brakes and pads F/R
sway bar bushes F/R
Replace exhaust gaskets manifold through to resonator

Current setup includes
lifted 50 with Nitros
Advanced headers and high flow cats
Air intake mod(all restrictions removed)
Continental cross contact AT's
LED interior lighting
Night Breaker unlimited exterior lighting
Rear lamp converted to reverse lamp
Navra spotties
Factory tow bar
factory rear diff lock

Still to do considering the klm's
F/R wheel bearings
ball joints
I would like to take on all the suspension bushes as well

Thanks for looking!

[P4J3R0]

Nice clean NS

[gringo]

Nice Pajero you got there neighbour

[saffer]

Looking good!
How do you find the headers, I've been looking at them for a while.

Cheers

[Samoya]

Nice Pajero you got there neighbour

Thanks neighbour have to drop the kids in for a trim and say gday

[Samoya]

Looking good!
How do you find the headers, I've been looking at them for a while.

Cheers

Thanks mate the truck is slowly getting there
Oils on Sunday
Really happy with the headers have had no issues with them bit of extra poke to still not any reduction it consumption nice bit of roar but I didn't buy a NS petrol for economy got itf or the killer 6g75 MIVEC
Wouldn't mind popping it on the dyno one day
I think the next thing is the piggyback ecu
Headers have done about 30k had them off recently and inspected and they came up trumps I have had and issue with the facricated y pipe not mating up the the 2 bolt flange of the passenger header but I had the whole thing off last week and redid all the gaskets headers back and resolved the issue at this point i will put it down to poor workmanship by the previous exhaust repairer
If you want it done well and right do it yourself

[gringo]

Hey Andrew it sounds like a plan

[Troy711]

"Rear lamp converted to reverse lamp"

Looks good, I'm pretty keen to know how you managed to get it to look so neat, it looks factory!

[Samoya]

"Rear lamp converted to reverse lamp"

Looks good, I'm pretty keen to know how you managed to get it to look so neat, it looks factory!

Thanks Troy
When the rear fog lamp in the spare wheel got smashed I thought Ive never used a rear fog light in 23 years of driving so I just wired it up a replacment to the reverse circuit neat and discreet
As for looking factory I guess we just like a clean look I took the side steps off and other bits of plastic stuff that either gets ripped off or damaged and rattles
She's really only a part time 4x4 and we dont do anything extream just the normal family thing bit of camping hunting and fishing
Big service tomorrow 45k on the new engine should keep me busy

[Troy711]

Does it have a clear lens on it?

[geopaj]

Does it have a clear lens on it?

Yeah, every one I've ever seen (or at least noticed) has a red lense.

[geopaj]

Does it have a clear lens on it?

Yeah, every one I've ever seen (or at least noticed) has a red lense.

[Sunnywaxman]

Hi All
Been floating around for a little while so I thought I would say Hi officially
Firstly thanks to the forum for the great info from members and fixs here solved quite a few issues
Our Pajero is pretty stock a few mild enhancements it is mainly the brides drive but I got to say I goes like a shot duck probably give the 380 a run for its money
2007 NS GLS Petrol Auto 3.8 MIVEC 243k silver
Engine replaced by previous owner (new not secondhand) at 218k
We have owned the Truck for about 6 months
major service recently completed by me including
Fluids-Auto flush 15lt put through her,brake,coolant,power steer,diffs,engine oil and transfer
air filter, oil filter, cabin filter
machined brakes and pads F/R
sway bar bushes F/R
Replace exhaust gaskets manifold through to resonator

Current setup includes
lifted 50 with Nitros
Advanced headers and high flow cats
Air intake mod(all restrictions removed)
Continental cross contact AT's
LED interior lighting
Night Breaker unlimited exterior lighting
Rear lamp converted to reverse lamp
Navra spotties
Factory tow bar
factory rear diff lock

Still to do considering the klm's
F/R wheel bearings
ball joints
I would like to take on all the suspension bushes as well

Thanks for looking!

Wondering where you got the rear clear lens or replacement light from?