Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 1 Pajero

Generation 1 Pajero NA - NG Models 1983 - 1991

Reply
 
Thread Tools Display Modes
  #1  
Old 27-07-17
nitram977 nitram977 is offline
Junior Member
 
Join Date: Mar 2008
Location: Wollongong.NSW
Posts: 44
Default Tailshaft yokes - Aus Model and Import - Same or different?

Hi again,

Can anyone confirm whether the bolt pattern on a diff pinon yoke is different between MMAL Australian supplied and MMC imported models for diesels?

Thank you in advance.

Scott
Reply With Quote
  #2  
Old 31-07-17
tuffpajNT tuffpajNT is offline
Member
 
Join Date: Dec 2014
Location: Darwin
Posts: 74
Default

can you provide more information? Petrol Diesel? auto vs manuals?

The 2.6ltr petrol manual KM145 gear box from my NE uses a smaller reverse slip yoke compared to the NF with the same engine.

I have swapped my km145 gearbox to the better more stronger v5m21 from gen2 NH i think and had to shorten the original tail shaft 15mm and use the yoke from a 2nd gen pajero as it more spines and large diameter yoke
Reply With Quote
  #3  
Old 31-07-17
nitram977 nitram977 is offline
Junior Member
 
Join Date: Mar 2008
Location: Wollongong.NSW
Posts: 44
Default

2.5 L import diff to Aus complied 2.5l diesel tailshaft.
Reply With Quote
  #4  
Old 31-07-17
tuffpajNT tuffpajNT is offline
Member
 
Join Date: Dec 2014
Location: Darwin
Posts: 74
Default

AH sorry i didnt read it properly cause was sneaking a read whilst working. i have a JDM Pajero diesel and can measure the tailshaft york bolt pattern this weekend
Reply With Quote
  #5  
Old 16-08-17
wazza87's Avatar
wazza87 wazza87 is offline
Member
 
Join Date: Apr 2015
Location: Gold Coast
Posts: 178
Default

Try megazip.net mate, use your vin to get genuine part numbers.
__________________
-jero- 1990 SWB NG TDi import, 33'' BFG KM2 muddies on 15x8 'sunnies', steel winch bar, custom rock sliders, Steel roof rack, Domin8r 12,000lb winch, 2.5" straight through exhaust, Allisport TM intercooler, Boost Tee, EGR delete, 22' LED bar, GME UHF + GME antenna, high gain fm/am antenna, duel batteries, 2in lift - Lovells springs and Gabriel shocks/struts + tough dog torsion bars, snorkel, catch can, diff breathers, VDO boost, oil pressure & EGT gauges, fusion speakers, more to come...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
NM Tailshaft options ross79 Generation 3 Pajero 2 17-06-17 02:13 PM
Propshaft/tailshaft SWB ANDY Generation 2 Pajero 4 12-01-16 07:25 PM
Removing tailshaft allanmac Generation 2 Pajero 5 22-12-15 08:59 PM
NM Tailshaft Replacement collits Generation 3 Pajero 3 29-12-11 03:59 PM
Tailshaft collar sno1811 Generation 1 Pajero 2 07-05-08 09:21 PM


All times are GMT +10. The time now is 04:37 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.