AOB switches electrical connection

[brucie_990]

I have recently installed a set of driving lights and purchased an AOB driving light switch which I installed beside the ASC switch in an NT Pajero. The driving lights work but I would like to finish the installation and have the AOB switch illuminated. Can anyone suggest the best source of power for the switch and possibly provide a photo.

Thanks for your help.

[Pajshomoneroguntero]

Use a fuse tap from a fuse in the drivers side fuse box tapped into an ACC circuit and draw the dimmer power from any gauge light with the foot well light being quite easy to access (the NX has foot well lights dimmed with the instrument cluster so not sure if your model has them)

http://www.jaycar.com.au/double-mini-blade-fuse-socket-wire-tap/p/SF5125

[green troll]

AOB switches electrical connection

Hmm not sure my foot well lights dim. But a button wire illumination is green with grey. Can just take from asc.

[Pajshomoneroguntero]

Now that you mention it I'm not sure mine do either. Maybe I was just looking to tap into an instrument cluster light circuit. I'll have to have a closer look what I did now.