I was wondering what is the easiest/safest place to pick up a 12 volt supply with ignition on ( not just accessory )
Below Nav Bar Ad Module
Collapse
12 volt pick up
Collapse
X
-
Test light at the fuse panel to the right of the steering wheel then a piggy back fuse to tap into it. Simples.
What are you trying to power, you will need to match required current draw to what is available.Last edited by amec; 20-01-20, 07:53 PM.PC Challenger. TJM bar and winch. Dual battery with Redarc dc-dc, Redarc trailer brake controller. USB outlets everywhere, Uniden UH5060 UHF, $0.45 EGR mod. Lovells springs and Bilstein shocks For 50mm lift. LED spotties. MM 4X4 Automate. Airtec snorkel, Hancook dynapro, Bushskinz skid plates x3 + side steps.Torqit peddle thing. Torqit Power Module.
-
-
I picked up power from the wiper motor harness to power up my daylight running lights.2012 PB Challenger 4x2 auto
30mm Whiteline Front Sway Bar / SPV Delete / Catch can / Auto-mate / Lowered Front 35mm Rear 50mm / Side Steps Lowered 20mm / Rear Spoiler / Sony Double DIN xav-ax1000 / Rear Camera / All the Chrome bits
Comment
-
Matched content
Collapse
Comment