Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 4-1 Pajero

Generation 4-1 Pajero NS Model 2006 - 2009

Reply
 
Thread Tools Display Modes
  #1  
Old 17-04-19
ski ski is offline
Junior Member
 
Join Date: Sep 2018
Location: New Zealand
Posts: 10
Default Winch mounting position

Hi ,new MCC bullbar arrived today not bad for 7 months,Tube model . SWB 2007 diesel. notice there is no winch cradle and turns out its bolted to the bar with the feet facing forward. Is this strong enough and is this normal for this model?. Cheers.
__________________
2007 NS SWB Pajero 3.2 Diesel ARB front locker ,factory rear locker,40mm lift ,TC mod, Silverstone extreme tyres,MCC bullbar ,Runva 11XP .

Last edited by ski; 26-04-19 at 06:00 AM.
Reply With Quote
  #2  
Old 17-04-19
geopaj's Avatar
geopaj geopaj is offline
Valued Member
 
Join Date: Jul 2007
Location: Adelaide
Posts: 2,173
Default

Quote:
Originally Posted by ski View Post
Hi ,new MCC bullbar arrived today not bad for 7 months,Tube model similar to xrox.. SWB 2007 diesel. notice there is no winch cradle and turns out its bolted to the bar with the feet facing forward. Is this strong enough and is this normal for this model?. Cheers.
No idea if it's 'normal' for an MCC bar, but my ARB Deluxe bar has the same (no seperate cradle and the winch mounted feet forward directly into the bar).
__________________
Silver NT VRX Di-D

| ARB bullbar | snorkel | Bushskinz guards | UltraGauge MX | 2" lift | airbags | Cooper AT3 LT's | Superwinch X9 | 80ltr diesel tank in rear seat well | 22ltr water tank | aux trans cooler | MM Lockup Mate | GME UHF | locker/TC mod | SPV EGR | rear LED work light | rhino platform | ARB awning | rear drawers ... & plenty of scratches

My Build Thread - HERE

Previously - NL Pajero (now owned by Forum member 'Gemster')
Reply With Quote
  #3  
Old 17-04-19
aussieintas's Avatar
aussieintas aussieintas is offline
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,612
Default

Yes it is normal and is strong enough.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #4  
Old 18-04-19
kiwi1973's Avatar
kiwi1973 kiwi1973 is offline
Valued Member
 
Join Date: Sep 2012
Location: New Zealand
Posts: 1,144
Default

My MCC bar (Falcon) also allows for the winch to mount as you described - feet forward on the bar. I questioned it at the time too, but having now had need to do a big pull with it I can verify that it is indeed strong.
__________________
2007 Shogun 3.2DID. UK Diamond Spec. Harrop Eaton front E-locker. MCC Bullbar. Runva 11XP winch. 17" Dotz rims with 32" STT Pro. Koni HT RAID 90 series with +2" EHD Lovells springs. ASFIR protection plates for engine & transmission. DIY steel rocksliders. LRA 81 litre auxiliary fuel tank. Waeco CFX-40. Home made drawers & fridge slide. Dual power - 120a/h AGM with CTEK DC-DC. LED lighting. 43 litre water tank with two electric pumps - one for tap (via filter) & one via heat exchanger.
Reply With Quote
  #5  
Old 19-04-19
martnH martnH is offline
Junior Member
 
Join Date: Nov 2017
Location: AU
Posts: 17
Default

just rotate the clutch

Sent from my SM-G965F using Tapatalk
Reply With Quote
  #6  
Old 25-04-19
ski ski is offline
Junior Member
 
Join Date: Sep 2018
Location: New Zealand
Posts: 10
Default

Thanks for the replies,Started to install MCC bullbar (now called a Mcarmor copy)certainly doesn't look very strong so will go with your opinions . The bolt on wings stick out way to far on the corners so will replace with a better approach pipe work . Installing a runva 11xp winch.
__________________
2007 NS SWB Pajero 3.2 Diesel ARB front locker ,factory rear locker,40mm lift ,TC mod, Silverstone extreme tyres,MCC bullbar ,Runva 11XP .

Last edited by ski; 26-04-19 at 06:01 AM.
Reply With Quote
  #7  
Old 17-05-19
ski ski is offline
Junior Member
 
Join Date: Sep 2018
Location: New Zealand
Posts: 10
Default

Went to assemble bullbar and decided to throw away the bolted corner wings stick out way to far my wife called it a bench seat and I will make up new corners. Fairlead didn't fit had to be re positioned and redrilled easy then cutting the opening . Moved solenoid to inside grill ,still plenty to do.
__________________
2007 NS SWB Pajero 3.2 Diesel ARB front locker ,factory rear locker,40mm lift ,TC mod, Silverstone extreme tyres,MCC bullbar ,Runva 11XP .
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
winch mounting plate Gilles29790 Generation 3 Pajero 0 01-05-17 06:14 PM
Mounting position for breakaway battery monitor Muzza Generation 4-3 Pajero 14 17-03-17 08:13 PM
Options for mounting winch without winch bar? Scoteye Generation 3 Pajero 1 27-02-15 07:30 PM
Winch mounting .. boJaber Generation 4-1 Pajero 19 20-01-09 04:04 PM
Winch mounting Eastie Bolted on bits, factory and aftermarket accessories 3 16-01-08 10:28 AM


All times are GMT +10. The time now is 02:39 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.