What other makes/models wheels fit?

[chrisall]

I have an NP with sunraysia wheels that to be honest have too much -ve offset for my liking (ie stick out too far) As the tyres are getting a bit ragged I'm thinking rather than shelling out for a new set of tyres for these rims I'm wondering what else I could fit.

Any tips on what wheels off other makes / models would fit, e.g Patrol, Landcruiser, Hilux, Navara, Triton?

Alternatively, should I just look for a set of stock NP or later alloys?

I don't do any serious offroading and $'s are tight :-/

Cheers,

[old Jack]

Gen 3 and 4 Pajero all have P46 offset so all factory rims in 16,17 &18" will fit if your Pajero has the small centre hub diameter.
16" tyre's are cheaper than 17" or 18"
MN Triton and PB/PC Challenger rims are P38 offset and these are a legal fit and cone in both 16" and 17" diameter.
Remember there are different wheel nuts required for steel vs alloy wheels so with 24 nuts required if you can pick up wheels and nuts to suit it will save you money.
Genuine nuts to suit allot rims are about $4 each if ordered from Partsque but double that from dealer spare parts.

OJ.

[pronvit]

Here in NZ there are always brand new 17x7.5" rims taken off Tritons on sale very cheap. Seems like a good option, right? The only problem they're always sold in sets of 4, need to get another one somewhere.

[NJV6]

Here in NZ there are always brand new 17x7.5" rims taken off Tritons on sale very cheap. Seems like a good option, right? The only problem they're always sold in sets of 4, need to get another one somewhere.

I need another one as well, we just need two more people in NZ wanting triton rims

[chrisall]

Thanks for all the responses guys, some very useful info there for reference.

In the end I bit the bullet and bought a set of 4 Goodride SL 369 LTs to go on my steelies. I know that budget brands are heavily frowned upon but they do the job for what I need.

Cheers,