MQ MY16 electrical info rear of vehicle camera

[Wilkram]

Hello all - just wondering if anyone would have information as to what is the standard provided camera connector at the rear of an MQ single cab chassis Triton - I have a 2015 MY16 and want to fit a Kenwood CMOS 320 camera as a reversing camera - it did not come with the optional reversing camera fitted.
I have checked the rear the vehicle and there are a couple of spare connectors taped to the loom, does anyone know a) which connector at the rear is the standard one for reversing camera, b) a wiring diagram of the connector so I can integrate with the camera wiring and c) any other information I may need?
Thanks in advance
Wilkram

[Spikey]

Usually it's an RCA plug and probably a round power plug. RCA is normally yellow.

[Keithyv]

First things first, is the head unit even capable of taking a camera feed?
Assuming it is, I'd be getting a multimeter and probing the spare plug you found while the car is in reverse (engine OFF or wheels chocked for safety!)

You should find 12 or 6 volts somewhere when in reverse.
If it's anything like a Pajero the camera takes 6V and not 12V so you may do some fiddling to get around that.
The 'video' feed is likely to be yellow & white wires.

See what you can find here - Triton is L200 elsewhere...

http://mmc-manuals.ru/manuals/l200_2006/online/Service_Manual/2015/index_M1.htm

[Wilkram]

Thanks for the information, I tried to trace the plug with a multimeter to no avail, in the end I ran another cable through the frame, all working fine now.

Thanks again