Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 2 Pajero

Generation 2 Pajero NH - NL Models 1991 - 2000

Reply
 
Thread Tools Display Modes
  #1  
Old 10-01-19
Patagonia's Avatar
Patagonia Patagonia is offline
Valued Member
 
Join Date: Dec 2009
Location: Santiago, Chile!!!!!
Posts: 805
Default rear shock mounting bolt specs

Hi,
does somebody has the specs of the lower bolt of the rear shock of a SWB NL? I lost one and cannot find the replacement here, with the spec I can buy an alternative one else I will need to remove the other one to use as sample but donīt want to be left on foot these days...

Part number is MF106175



thanks
__________________
2000 SWB NL 3.5 SOHC V6 AT.
Adjustable suspension, Rear Locker, Suspension Seats, Cruise Control, 8500 Lbs winch, all factory fitted.
31x10.5R15 Pirelli ATR?s and forever thinking on the lift.
2009 SWB NS 3.2 DOHC DID AT 265/70/17 BFG AT/KO, OME SD Springs +4 Rear locker, 8.500 Lbs Winch...new toy!!!
Reply With Quote
  #2  
Old 10-01-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,474
Default

All the sites I looked at including Amayam and Partsouq say M16Ũ65mm long. Pic attached below.
Attached Images
File Type: jpg Screenshot_20190110-173124_Samsung Internet.jpg (71.7 KB, 11 views)
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #3  
Old 10-01-19
aussieintas's Avatar
aussieintas aussieintas is online now
Valued Member
 
Join Date: Feb 2013
Location: Sorell, Tasmania
Posts: 1,474
Default

Forgot to add, M16 thread has a standard thread pitch of 2 but can be 1.5.

I cant say for certain as I haven't measured the thread pitch but would be saying those shock bolts would have a 2 pitch thread.

Hope someone can assist further.
__________________
2008 NS X SWB DiD auto in cool silver, Pirelli Scorpion ATR's, MCC bull bar with Stedi Summit fog/DRL's, Airtec(TJM) snorkel.

Previously
88 NF SWB 2.6 manual
92 NH LWB 3.0 auto
92 NH J-Top 2.5 manual
95 NJ SWB 3.0 auto
99 Cruiser 4.5 manual with all the fruit
Reply With Quote
  #4  
Old 11-01-19
Patagonia's Avatar
Patagonia Patagonia is offline
Valued Member
 
Join Date: Dec 2009
Location: Santiago, Chile!!!!!
Posts: 805
Default

Thanks! Think that will do, pitch sohuld be not that important as I need to buy the corresponding nut also...
__________________
2000 SWB NL 3.5 SOHC V6 AT.
Adjustable suspension, Rear Locker, Suspension Seats, Cruise Control, 8500 Lbs winch, all factory fitted.
31x10.5R15 Pirelli ATR?s and forever thinking on the lift.
2009 SWB NS 3.2 DOHC DID AT 265/70/17 BFG AT/KO, OME SD Springs +4 Rear locker, 8.500 Lbs Winch...new toy!!!
Reply With Quote
  #5  
Old 11-01-19
old Jack's Avatar
old Jack old Jack is online now
Valued Member
 
Join Date: Jun 2011
Location: Adelaide
Posts: 6,288
Default

Quote:
Originally Posted by Patagonia View Post
Thanks! Think that will do, pitch sohuld be not that important as I need to buy the corresponding nut also...
I thought the nut was welded to the suspension arm, if so then the thread pitch is important.
If the nut is not welded on then make sure the plain shank of the bolt is long enough to protrude through the nut side of the mounting bracket.

OJ.
__________________
2011 PB Base White Auto, Smartbar, Cooper STMaxx LT235/85R-16,TPMS, HR TB, 3 x Bushskinz, front +40mm Dobinson , rear +50mm EHDVR Lovells, Dobinson MT struts and shockers, Peddars 5899 cone springs, Windcheater rack, GME UHF, Custom alloy drawer system inc. 30lt Engel & 2 x 30 AH LiFePo batteries + elec controls, Tailgate hi-lift/long struts, Nightbreaker +130LB & Phillips +100 HB, Lightforce 20" single row driving beam LED lightbar, Scanguage II.
MM4x4 Auto Mate, Serial No 1 .
Reply With Quote
  #6  
Old 11-01-19
Patagonia's Avatar
Patagonia Patagonia is offline
Valued Member
 
Join Date: Dec 2009
Location: Santiago, Chile!!!!!
Posts: 805
Default

Quote:
Originally Posted by old Jack View Post
I thought the nut was welded to the suspension arm, if so then the thread pitch is important.

If the nut is not welded on then make sure the plain shank of the bolt is long enough to protrude through the nut side of the mounting bracket.



OJ.
That would explain why the whole setup dissapeared
__________________
2000 SWB NL 3.5 SOHC V6 AT.
Adjustable suspension, Rear Locker, Suspension Seats, Cruise Control, 8500 Lbs winch, all factory fitted.
31x10.5R15 Pirelli ATR?s and forever thinking on the lift.
2009 SWB NS 3.2 DOHC DID AT 265/70/17 BFG AT/KO, OME SD Springs +4 Rear locker, 8.500 Lbs Winch...new toy!!!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pb xls rear diff locker specs coughy PB -PC Challenger 2009 - 2014 22 09-07-17 11:50 AM
specs. for rear bilsteins Inyo_man Generation 3 Pajero 9 20-08-15 02:42 AM
rear shock davecambo PA Challenger 1998 - 2006 5 12-04-14 07:43 PM
Rear Coil specs Coopspop Generation 1 Pajero 0 19-08-12 08:17 AM
Snapped Rear Shock sjclarke Generation 2 Pajero 1 14-01-09 01:19 PM


All times are GMT +10. The time now is 01:52 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.