Below Nav Bar

Collapse

Handbrake Sleeve/cover

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • martialllaw
    Senior Member
    • Jan 2012
    • 257
    • Narangba

    Handbrake Sleeve/cover

    This may sound petty, But has anyone found a soft cover/sleeve for the handbrake lever. I find quite often that the most comfortable seating position is with my knee/leg resting on the handbrake. However as the handle is hard this becomes uncomfortable. (I know Suck it up Princess )
    2010 NT GLS, ARB Deluxe winch bar, GME TX3540 UHF, TJM battery tray, DBA T3 Disc's, Front & Rear Harop E-Lokers, AAA rear draw system, Anderson connector for AUX power, kumho mt51 265 / 70 / R 17, Bushskinz sliders and Intercooler/Sump/Transmition/Transfer case Bash Plates, Bilstein/Dobinson combo, 2x2m austrack-deluxe-vehicle-awning, Airtec Snorkel, Wetseat Covers front /rear + centre console cover, SPV EGR MOD Mk3.
  • martialllaw
    Senior Member
    • Jan 2012
    • 257
    • Narangba

    #2
    Ok so it's apparently just me 😀
    Anyway the helpful guys at Inland Australia made up aa sleeve for me. This has already provided to be much more comfortable to rest my leg/knee against. Just a couple of mm of padding makes a big difference.
    Attached Files
    2010 NT GLS, ARB Deluxe winch bar, GME TX3540 UHF, TJM battery tray, DBA T3 Disc's, Front & Rear Harop E-Lokers, AAA rear draw system, Anderson connector for AUX power, kumho mt51 265 / 70 / R 17, Bushskinz sliders and Intercooler/Sump/Transmition/Transfer case Bash Plates, Bilstein/Dobinson combo, 2x2m austrack-deluxe-vehicle-awning, Airtec Snorkel, Wetseat Covers front /rear + centre console cover, SPV EGR MOD Mk3.

    Comment

    • Hungie
      Member
      • Jan 2015
      • 157
      • NSW Central Coast

      #3
      Like a little stubby holder for your handbrake
      03 NP Exceed 3.5 V6 petrol auto, 2 inch Lovells / Bilstein lift, 15mm poly spacer in rear, 8mm alloy strut spacer in front (total 3" lift) 16x8 Ballistic Jester alloys 0 offset, 33" (285/75/16) Atturo Trail Blade M/T's, 2.5 exhaust with Advance extractors into high flow steel CAT and tri-flow muffler & resonator

      Comment

      • Fritterbug
        Valued Member
        • May 2013
        • 470
        • Brisbane

        #4
        You could have tried a cut off pool noodle
        MY14 Pajero VRX

        Comment

        Matched content

        Collapse
        Working...
        X