Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Challenger/ Pajero Sport > Pajero Sport

Pajero Sport The Pajero Sport new to Oz

Reply
 
Thread Tools Display Modes
  #1  
Old 13-04-17
Skonie Skonie is offline
Junior Member
 
Join Date: Apr 2017
Location: Banksia Beach
Posts: 1
Default Nudge Bar for PS Exceed

Just wondering if anyone has fitted an after-market nudge bar to a PS Exceed and whether it interferes with the detectors on the front of the Exceed? ECB provide a couple of variants of a nudge bar for the Exceed, however on their website the product description says that it may interfere with the FCM detector or front camera.
Reply With Quote
  #2  
Old 15-04-17
woffleon woffleon is offline
Member
 
Join Date: Jul 2016
Location: NSW
Posts: 110
Default

Yeh.... I've contacted a few that promote their bars for ALL pajero sport (online) and have had replies that they will NOT fit exceed model. I suspect it will need the 2 "grill" parking sensors to be relocated out to the front nudge bar with a simple connector/extension. Think its low enough to clear the radar unit and camera below it.
__________________
Sterling Silver Pajero Sport Exceed -- HR towbar - Towpro Elite - Duel battery - King spring KCRS23
Reply With Quote
  #3  
Old 24-04-17
Paddymac Paddymac is offline
Member
 
Join Date: Apr 2012
Location: Cairns
Posts: 57
Default

East coast are doing a nudge bar for the Exceed. I wrote to them and they assure me you can install it on a PS Exceed. I did note that they relocate the two front sensors onto the nudge bar, have a look at the east coast bars web site. It is fairly clear.
Reply With Quote
  #4  
Old 25-04-17
woffleon woffleon is offline
Member
 
Join Date: Jul 2016
Location: NSW
Posts: 110
Default

Quote:
Originally Posted by Paddymac View Post
East coast are doing a nudge bar for the Exceed. I wrote to them and they assure me you can install it on a PS Exceed. I did note that they relocate the two front sensors onto the nudge bar, have a look at the east coast bars web site. It is fairly clear.
Thanks paddymac . I had a look but the website may not be updated yet. The pic shows a bar that covers the front camera and radar but this may not be the bar your referring to. Did they send u something that is not on website .....installation guide or fitment PDF?

To get it to clear would mean it covers the existing number plate so the bar would need a mount for that as well like some of the stainless steel bars......just a light channel across the bottom.
__________________
Sterling Silver Pajero Sport Exceed -- HR towbar - Towpro Elite - Duel battery - King spring KCRS23

Last edited by woffleon; 25-04-17 at 08:52 AM.
Reply With Quote
  #5  
Old 25-04-17
Paddymac Paddymac is offline
Member
 
Join Date: Apr 2012
Location: Cairns
Posts: 57
Default

https://www.ecb.com.au/vehicle.php?M...SEARCH2=SEARCH

That is the page look at the 76mm bar
I have an email from East Coast saying it's for the Exceed
I tried to copy it but couldn't figure out how.
If you know how to do it I'll send it to you.
They also sent me the fitting instructions.
Reply With Quote
  #6  
Old 25-04-17
woffleon woffleon is offline
Member
 
Join Date: Jul 2016
Location: NSW
Posts: 110
Default

Quote:
Originally Posted by Paddymac View Post
https://www.ecb.com.au/vehicle.php?M...SEARCH2=SEARCH

That is the page look at the 76mm bar
I have an email from East Coast saying it's for the Exceed
I tried to copy it but couldn't figure out how.
If you know how to do it I'll send it to you.
They also sent me the fitting instructions.
Thanks again....try and attach fitting instruction (PDF) to this thread may be useful for others as well.
__________________
Sterling Silver Pajero Sport Exceed -- HR towbar - Towpro Elite - Duel battery - King spring KCRS23

Last edited by woffleon; 26-04-17 at 02:40 AM.
Reply With Quote
  #7  
Old 26-04-17
Paddymac Paddymac is offline
Member
 
Join Date: Apr 2012
Location: Cairns
Posts: 57
Default

https://www.ecb.com.au/Trade/DBfiles...73_fitting.pdf

Fitting instructions
Reply With Quote
  #8  
Old 26-04-17
Paddymac Paddymac is offline
Member
 
Join Date: Apr 2012
Location: Cairns
Posts: 57
Default

This is what I received from East Coast along with the fitting instructions

Your Vehicle Details:

Mitsubishi Pajero Sport
(05/2016 - On) Exceed Models

ECB product you're interested in:

Nudge Bar 76mm - ADR Compliant


Finish: Polished
Price: $ 845.00 (inc GST)
Please note freight and fitting costs may also apply.

These products are available from the following authorised ECB Dealer:

TJM - Cairns 4WD Megastore
221 Scott Street, Bungalow, Cairns
4870
Ph: 07 4047 8900
Fax: 07 4033 7950

Additional Notes:

The camera does not need to be relocated like the sensors do. I have attached a copy of the fitting instructions to this email for you to have a look at also.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Bull or nudge bar solution for exceed yet? SenojNW Pajero Sport 1 14-07-16 12:15 PM
NS - NT Nudge Bar MattD Bolted on bits, factory and aftermarket accessories 6 12-11-15 01:04 PM
NX Nudge Bar KP3560 Bolted on bits, factory and aftermarket accessories 3 10-07-15 11:33 AM
Fitting a tjm nudge bar to nm simmilar to OEM nudge BjTeng Generation 3 Pajero 0 04-10-14 01:19 AM


All times are GMT +10. The time now is 11:08 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.