Gday all. Some time ago I posted my "Breathers done on the Nw" thread with instructions on how I did the transfer case too. It seems as though I got it wrong. If you copied me then re read it with the link below. Your transfer case breather maybe more exposed than std and vulnerable to water contamination in water crossings.
Below Nav Bar Ad Module
Collapse
If you followed my breather extension instructions, read this
Collapse
X
-
If you followed my breather extension instructions, read this
Cheers, Hatto
2012 NW GLS Diesel Auto with:
ARB delux bar, full length Ocam ally roof rack with rear LED work light, dual batteries, DIY rear ally drawers with fridge slide, 2" lift oztec/kings, Polyairs, Kings awning 2.5 x 2.5m with LED strip light, pair of genr8 40w LED spot/flood driving lights, iron man 4x4 22" LED light bar, mounted thumper compressor, 70L water tank & 12v pump, 120w solar, LED interior lights, Boo Boo's bash plates, Safari snorkel and Grande mk lll 12000lb winch.Tags: None
-
Matched content
Collapse