Below Nav Bar

Collapse

PA Challenger Guards

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • Pearcie
    BushSkinz 4x4
    • Nov 2007
    • 1120
    • Wattagans
    #1

    PA Challenger Guards

    Hi guys,
    I have a customer with a PA Challenger who I am going to be designing up front/sump guards for and thought I would just see if there was any guys out there looking for a set. Not sure if they will be a stock item but though if 1 set was being done it may be worth asking if there was anyone out there looking for some. I dare say they would fit the older model Triton as well given the New Triton and Challenger are the same at the front end.

    Cheers,
    Kieron
    2012 Holden RG Colorado LX 2.8L Auto "Rad Rado"
    Snorkel, Bilstein & Kings 50mm Lift, Custom Sliders, BushSkinz Underbody Protection, UHF, ARB Compressor, Ironman Bull Bar, Ironman 9500lb Rope Winch, Ironman HID Spotties, BFG KM2 Muddies.

    Retired: NS Pajero Exceed 3.8L

    Retired: NS SWB X DiD "The BushSkinz lil Paj"

    http://www2.pajeroclub.com.au/forum/...ead.php?t=9928

    Retired: NM Pajero 3.5L

    www.bushskinz4x4.com.au[/SIZE]
    Tags: None
  • Pickle
    Administrator
    • Jun 2007
    • 6886
    • All over Oz
    #2
    Count me in Kieron. The last of my mods.
    Dave
    NX Pampas Cat GLS MY16
    Member 1228 Pajero Club

    Comment

    • Pearcie
      BushSkinz 4x4
      • Nov 2007
      • 1120
      • Wattagans
      #3
      Good to hear Dave, sorry for the late reply mate it has been going gang busters around here lately.

      The PA guards will now also include a Transmission guard.

      Cheers,
      Kieron
      2012 Holden RG Colorado LX 2.8L Auto "Rad Rado"
      Snorkel, Bilstein & Kings 50mm Lift, Custom Sliders, BushSkinz Underbody Protection, UHF, ARB Compressor, Ironman Bull Bar, Ironman 9500lb Rope Winch, Ironman HID Spotties, BFG KM2 Muddies.

      Retired: NS Pajero Exceed 3.8L

      Retired: NS SWB X DiD "The BushSkinz lil Paj"

      http://www2.pajeroclub.com.au/forum/...ead.php?t=9928

      Retired: NM Pajero 3.5L

      www.bushskinz4x4.com.au[/SIZE]

      Comment

      • Pearcie
        BushSkinz 4x4
        • Nov 2007
        • 1120
        • Wattagans
        #4
        Finally all done!!!

        Hi guys well the PA Challenger guards are now completed. I have attached a couple of pics of the Front/Sump and Transmission Guards. These were designed on an Auto if some one has a manual I should only need 1 measurement to confirm if they are the same.

        They will Retail for $275 for the Front/Sump and $225 for the Transmission.

        I will wait a day or 2 to see how many guys are interested in a set before I organise the first batch as I don't expect these to be hugely popular so don't want to be stuck with heaps on hand although I will keep a couple in stock.

        Hope everyone had a good Easter. I have been off work for about a week since burning my hand in the workshop last Saturday and then getting the flu, so my apologies to some of the guys I haven't gotten back to yet.

        Cheers,
        Kieron
        Attached Files
        2012 Holden RG Colorado LX 2.8L Auto "Rad Rado"
        Snorkel, Bilstein & Kings 50mm Lift, Custom Sliders, BushSkinz Underbody Protection, UHF, ARB Compressor, Ironman Bull Bar, Ironman 9500lb Rope Winch, Ironman HID Spotties, BFG KM2 Muddies.

        Retired: NS Pajero Exceed 3.8L

        Retired: NS SWB X DiD "The BushSkinz lil Paj"

        http://www2.pajeroclub.com.au/forum/...ead.php?t=9928

        Retired: NM Pajero 3.5L

        www.bushskinz4x4.com.au[/SIZE]

        Comment

        • Pickle
          Administrator
          • Jun 2007
          • 6886
          • All over Oz
          #5
          Well you know I am good for a set. (Let me know how payment gets to you.) I know some guys on 4WD Action forum will be good for a few sets.
          Dave
          NX Pampas Cat GLS MY16
          Member 1228 Pajero Club

          Comment

          • Pearcie
            BushSkinz 4x4
            • Nov 2007
            • 1120
            • Wattagans
            #6
            No worries mate, all you guys need to do is flick me through an email to [email protected] with your shipping address and contact details etc and I will get my wife to organise and email through an invoice.

            I will do the 2 guards delivered for $475 for you guys.

            Cheers,
            Kieron
            2012 Holden RG Colorado LX 2.8L Auto "Rad Rado"
            Snorkel, Bilstein & Kings 50mm Lift, Custom Sliders, BushSkinz Underbody Protection, UHF, ARB Compressor, Ironman Bull Bar, Ironman 9500lb Rope Winch, Ironman HID Spotties, BFG KM2 Muddies.

            Retired: NS Pajero Exceed 3.8L

            Retired: NS SWB X DiD "The BushSkinz lil Paj"

            http://www2.pajeroclub.com.au/forum/...ead.php?t=9928

            Retired: NM Pajero 3.5L

            www.bushskinz4x4.com.au[/SIZE]

            Comment

            • Pickle
              Administrator
              • Jun 2007
              • 6886
              • All over Oz
              #7


              Mine fitted yesterday by ARB Keilor Park whist getting serviced. No problems fitting them and a comment on the quality.
              Well done Kieron on another quality product sold to a forum member.
              Dave
              NX Pampas Cat GLS MY16
              Member 1228 Pajero Club

              Comment

              Previous template Next

              Matched content

              Collapse
              Working...
              X