How did you clear the ABS fault from the ECU?
Below Nav Bar
Collapse
Icarsoft HNMII
Collapse
X
-
Originally posted by erad View PostHow did you clear the ABS fault from the ECU?Previously: 2002 NM Pajero 3.2 DiD.
NS Pajero Manual with mods
Silver NT Platinum. Long ranger sub tank, Dobinsons IMS 2" lift, Custom lightweight storage system, dual battery system with DCS 75ah lithium and redarc bcdc1250, full bash plates, bullbar, winch
"If you cant beat them with brilliance, baffle them with bullshit"
Comment
-
-
Razor:
Thanks for the reply. Intermittent faults - aren't they lovely? I don't have any flashing lights on the car now, so I guess I don't have any faults, but I still cannot clear the stored ones. I have asked ICarsoft in the US about this. Am waiting for a reply.
Comment
-
-
You need to diagnose the problem first before any code can be cleared.
the heading should be about your codes/issue rather than a scan tool you're not sure how to use, if i was you i would take it to a professional
I dont think this has anything to do with the scan tool. It works fine for me and i purchased one for my Holden that works perfect.Last edited by Stoneman; 04-09-18, 02:30 PM.NS Pajero Exceed. With stuff
Comment
-
-
Do any of you blokes actually know what you are doing under a bonnet?
No one knew of the scan tool and now have a listen to you all
Bunch of Numpties LOL
This was a hilarious read, You all got a scan tool and now you’re all the experts and it must be the scan tool!Last edited by Stoneman; 04-09-18, 02:49 PM.NS Pajero Exceed. With stuff
Comment
-
-
Originally posted by sharkcaver View PostI cant answer re the HNMII, nor the not as functional I909 myself, however airbag codes have been cleared with the I909 as reported here on the forum, so I doubt that the HNMII wont also do it. Pull your airbag wire under the seat, get the fault and let us know if it clears it. Worst case you will need a trip to Mits with a mutt.NS Pajero Exceed. With stuff
Comment
-
-
Originally posted by Stoneman View Postyou seriously have an ego problem champMY16 NX GLX5 with just a few bits added. MY14 D-max spacecab, also with a few bits added.
My Journeys
Comment
-
-
Post your actual code and issue than someone might be able to help, I doubt very much it’s the scan tool and if you have a basic understanding of how they work you would get why I’m making this comment
You say a low voltage, what low voltage? What sensor?
I don’t understand how you had the codes but expected the scan tool to just remove them if you have not diagnosed anything?
Any half arsed mechanic would know this, maybe I’m missing something
Looks like you have plenty of cooks in the kitchen thoughNS Pajero Exceed. With stuff
Comment
-
Matched content
Collapse
Comment