Below Nav Bar

Collapse

Diff breather extension - NX

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • RyanR
    Junior Member
    • Sep 2018
    • 25
    • Sydney

    Diff breather extension - NX

    Hi all,

    I'd like to extend the diff breathers, gearbox and transfer case(?) into the engine bay.
    Has anyone done this and have some pictures?

    Cheers!
    PS, does anyone have a (link) workshop manual for the NX?
    My introduction:
    https://www2.pajeroclub.com.au/forum...ad.php?t=62295
  • Pajshomoneroguntero
    Valued Member
    • Jul 2013
    • 1438
    • Sydney

    #2
    I presume an Auto?


    There was a thread discussing the gearbox and transfer breathers. Conclusion is that there is still an entry even if you locate the obvious breather but should be ok as long as you don't roll upside-down whilst submerged. So I've not bothered with the tranny and transfer, just the diffs.


    Try http://faq.out-club.ru/ for the workshop manual. It only goes up to 2013 NW but is still primarily relevant for the NX.
    NX GLS MY16 Auto: MM Towbar | Spare Lift Kit | Cooper ST MAXX 265/65R17 | SPVi Module mk3.1 | Autosafe Half Cargo Barrier | Torque Pro App | Donaldson 3um 2ndry Fuel Filter | Diff Breathers | GME4500 UHF | Rhino Rack Pioneer Platform | Roley's Rear Bash Plate | Bushskinz Underbody Protection | Airtec Snorkel | Onboard Compressor | Awning | ARB Deluxe Bar | Lightbar | Sherpa4x4 Winch | Bushskinz Sidesteps | Masten TPMS

    Build Thread

    Comment

    • RyanR
      Junior Member
      • Sep 2018
      • 25
      • Sydney

      #3
      Thanks mate

      Surprised to hear about another entry point.... I'll look into this.

      Yes, an auto
      My introduction:
      https://www2.pajeroclub.com.au/forum...ad.php?t=62295

      Comment

      Matched content

      Collapse
      Working...
      X