Tweet
hi just wondering if any one has -22mm offset rims on a pajero and are these the same as patrol? i ordered some today thinking they where the same as patrol but know im not sure, pics of the rims and off set would be great thanks Daniel
-
-
i was under the impression patrol were only -12, but this varies with after market rims, mine are, from what i can gather only -12 and the stick out alot
If I agreed with you, then we would both be wrong
'89 NG Paj, 3L V6, now running 2" suspension lift, 33" Micky T Baja Claws's, Front LOKKA & 12,000lb winch -
hmm dont know where i got 22 from might ring up and change that tomorrowComment
-
no need to change it, the wide stance is cool hahah what tyres you putting on? If I agreed with you, then we would both be wrong
'89 NG Paj, 3L V6, now running 2" suspension lift, 33" Micky T Baja Claws's, Front LOKKA & 12,000lb winch Comment
-
just 31inch mud tyres, do you think the -22mm offset will stick out much more than urs? i want them to stick out the guards a little bit but probably not much more than ursComment
-
im running 32x11.5x15, yours are i assume only 31x10.5x15 so wouldnt be too bad, about on par i would imagine If I agreed with you, then we would both be wrong
'89 NG Paj, 3L V6, now running 2" suspension lift, 33" Micky T Baja Claws's, Front LOKKA & 12,000lb winch Comment
-
As I understand it:
'Cruisers are -22/-23mm.
Patrols are zero offset.
Some aftermarket rims are around -12/-13mm, as these are close enough to use on either vehicle. So, if you go to some retailers and ask for a "Patrol rim", you will receive -12/-13mm offset. At the same retailer, if you ask for a "Cruiser rim", you will receive -12/-13mm.
Or I could be wrong. I often am.
NT Platinum. DiD Auto with 265/70R17 ST Maxx, Lift, Lockers, Lockup Mate, Low range reduction, LRA Aux tank, bull bar, winch, lots of touring stuff. Flappy paddles. MMCS is gone!
Project: NJ SWB. 285/75R16 ST Maxx, 2" OME suspension, 2" body lift, ARB 110, 120l tank, bullbar, scratches, no major dents. Fully engineered in SA. NW DiD & auto in place - a long way to go....
Scorpro Explorer BoxComment
-
I have patrol wheels and with my 31x10.5x15 they just stick out past the guards so I had to put the rubber flares on..Comment
-
I wouldnt stress about it man its only 10mm out its only realy when they sit too far in that you need to worry as they may foul suspension or steering componentsComment
-
yeah tyre shop said patrols are -22 so i will stick with them, what is standard on a paj?Comment
-
On the gen1's, +10mm is standard If I agreed with you, then we would both be wrong
'89 NG Paj, 3L V6, now running 2" suspension lift, 33" Micky T Baja Claws's, Front LOKKA & 12,000lb winch Comment
-
sweet the -22s are gonna look awesomeComment
-
got them fitted they look heaps good and makes the paj look tuff as, probably sticks out the guards as much as bakerboys, i like but will need to get some flares from bunningsComment
-
Iwould get the Clark rubber flares.. For me they look heaps better but on the down side more money. ZComment
-
might check out the clark rubber one 2Comment
Comment