Torque Pro and Battery Voltage

[dreamerman]

Can't seems to find the main battery voltage gauge on Torque Pro. Anyone?

[BruceandBobbi]

Can't seems to find the main battery voltage gauge on Torque Pro. Anyone?

Here are the instructions.

Opentorque.

Tap realtime information. Hold finger on blank section of screen. You will see 'add display' press it.

Another window opens with a list of gauges to choose, dial, needle etc. Pick the type you are using

A page will open with a list of items. scroll down till you see battery voltage. Click on it.

Another window opens for you to choose the size of the dial you want. Click the size and bingo you will have voltage displayed.

[dreamerman]

Here are the instructions.

I see the following options:
O2 Sensor wide range voltage
O2 Volts Bank 1 sensor 1
Voltage (Control Module)
Voltage (OBD Adapter)

I assume O2 is oxygen so can't be for the battery. So I added the last 2 sensors and will try these out.

[BruceandBobbi]

No mate it's none of those

PM me your number and I will talk you through it.

Fairly simple to do.

[dreamerman]

PM me your number and I will talk you through it.

Hi, just PMed. Cheers

[dreamerman]

Went for a spin today and both Voltage (Control Module) and Voltage (OBD Adapter) gave very similar readings. Voltage(CM) is about 14.2V and Voltage(AD) always 0.2 or 0.3V higher than Voltage(CM).

[dreamerman]

By the way, Bruce and I compared our Torque Pros and seems his list of options are different to mine. Bruce's version is about 3 years old and mine 6 months.