fuel gauge OHM range

[Red_101au]

Hi fellow Pajero enthusiasts

I am toying with the idea of connecting the LPG fuel sender to the existing in dash fuel gauge of my 1990 NG V6.

I will need to use a Fuel Link Interface Module / Ohm range converter due to the opposing Ohm ranges.

As such I need to know what the Ohm ranges the in dash gauge uses.

any help with this matter would be greatly appreciated

Bob

[TomW]

I have copies of the gen 1 wiring diagrams somewhere, I will try and get them for you next week.

[Red_101au]

Thanks TomW
Much appreciated

[TomW]

I have put a copy of the manual here:

https://drive.google.com/open?id=0B6gn-WoB7xpCRmk4THZvOXhkclk

you can either view the individual sections or download the whole thing as a Zip.

Chassis electrical - Meters and Gauges has the values for the fuel sender. (3 Ohms full, 110 Ohms empty)

[Red_101au]

thanks for that Tom....
I actually do have this already, but did not find the values.... I must have overlooked it
I will recheck it

appreciated

[Red_101au]

I found the specs and if I am reading this correctly....
the resistance values are: 110 (empty) - 3 (full) at the gauge