The PLASTIC BATTERY TRAY, What were MM thinking. If yours hasn't failed yet, it most likely will.
So here is a simple $30 fix.
Remove the Battery Tray (3 x 8mm bolt and 1 x 6mm Bolt) and cut off the Rear lip. Trim the sides a little to remove the round corner. I used an Oscillating multi tool.
cut out the front corners of the battery tray
There are 4 little lumps the need to be trimmed back. this will reveal the 4 square holes.
Cutting out the corners and removing the original hold down lugs and the 4 little bumps on the sides allows the new tray to fit flat on the original tray.
So here is a simple $30 fix.
Remove the Battery Tray (3 x 8mm bolt and 1 x 6mm Bolt) and cut off the Rear lip. Trim the sides a little to remove the round corner. I used an Oscillating multi tool.
cut out the front corners of the battery tray
There are 4 little lumps the need to be trimmed back. this will reveal the 4 square holes.
Cutting out the corners and removing the original hold down lugs and the 4 little bumps on the sides allows the new tray to fit flat on the original tray.
Comment