Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 3 Pajero

Generation 3 Pajero NM - NP Models 2000 - 2006

Reply
 
Thread Tools Display Modes
  #1  
Old 6 Days Ago
Poita's Avatar
Poita Poita is offline
Valued Member
 
Join Date: Sep 2010
Location: Adelaide
Posts: 989
Default ARB tray: Proven battery fitment

Hi all,

I am going to start compiling a list of known battery combinations that fit the ARB dual battery tray for the Gen 3s. I spent ages comparing measurements trying to work out what would fit and what wouldnít, both length and height. If you can let me know what combinations you have in the same format as below, I can add them and hopefully make it a lot easier for others.
Note:
1. The front lip has been removed from the tray to allow for a larger front battery where noted
2. The height includes terminals unless otherwise noted

#1
Crank: Optima D34 Yellowtop. 750CCA, 55Ah, 245L x 171W x 199H
Aux: SSB HVT-70ZZD. 780CCA, 105Ah, 305L x 168W x 213H
Note: Crank at rear, aux at front, front lip removed

#2
Crank: Enirgi UMF115D26R. 750CCA, 85Ah, 257L x 172W x 220H
Aux: SSB HVT-70ZZD. 780CCA, 105Ah, 305L x 168W x 213H
Note: Crank at rear, aux at front, front lip removed. This combination is a just fit! The front terminal of the crank battery just misses (or just touches, hard to tell) the sound proofing cladding on the underside of the bonnet. I would not go any higher than 220mm for this position.

#3
Crank: <Make> <Part number>. CCA, Ah, L x W x H
Aux: <Make> <Part number>. CCA, Ah, L x W x H
Note: <position, front lip removed etcetc>

Cheers
Pete
__________________
NP Exceed MY05 DiD
Bushskins intercooler/sump/transmission guards | Ironman awning | Rhino Pioneer tray | ARB dual battery tray | 100Ah aux battery | Grabber AT2 tyres | Wholesale Automatic TC lockup | 9" 185W LED Spotlights | GME TX3500 | DIY shelf & Fridge Slide | Evakool 75 dual zone fridge | AEM Boost and Transmission Temp gauges | 2" Ultimate Suspension lift | HPD catch can | ARB bullbar | Redarc Tow Pro Elite
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Dual battery tray fitment Grafy82 Mechanical 10 02-04-17 12:45 PM
Battery tray tie down fix and modifying the tray for a bigger battery nicho Generation 4-3 Pajero 9 27-10-16 03:08 PM
Dual Battery Fitment Melbourne Tjf General Info 4 17-07-13 01:13 PM
Home made Battery Tray for Duel Battery setup gjh1967 Generation 3 Pajero 14 17-09-11 01:02 AM
DIY dual battery: Tray modding and reusing factory battery formertoyotaman Generation 4-2 Pajero 15 29-07-11 02:18 PM


All times are GMT +10. The time now is 01:28 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2018, vBulletin Solutions, Inc.