Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > General Information > Ongoing Projects that benefit members

Ongoing Projects that benefit members Projects from members than can be purchased at the right price.

Reply
 
Thread Tools Display Modes
  #1  
Old 15-05-18
svill123 svill123 is offline
Junior Member
 
Join Date: Jul 2016
Location: Melbourne
Posts: 11
Default Diagnostic Plug

I have made a simple standalone diagnostic plug which when plugged into the OBD port will cause the dash to flash the Engine light, ABS light, Transfer Case light or Auto Trans light for each respective system's diagnostic trouble codes (DTC). Nothing special, but a convenient and easy way to extract the fault codes.

This will show error codes for the following systems:
-Auto Trans (Gen 2 [3.5L only], Gen 3, Gen 4 [NS diesel, NS/NT petrol only])
-ABS Brake system (Gen 2, 3 & 4)
-Transfer case system (Gen 3 & Gen 4 [NS diesel, NS/NT petrol only])
-Engine 2.8TD (EDC / fly by wire only)
-Engine 3.0L 6G72 (some late-model Gen 2 NL only)
-Engine 3.5L 6G74 (Gen 2 & 3)
-Engine 3.2L 4M41 (Gen 3 pre-CRD only)

I will include a leaflet with instructions and error codes for systems as above.

Price is $25 inc. postage to anywhere in Aus. PM me if you'd like one.

Cheers.



Attached Images
File Type: jpg IMG_20180330_223620448-01.jpg (25.4 KB, 488 views)
File Type: jpg IMG_20180330_230419924-01.jpg (35.5 KB, 484 views)
File Type: jpg IMG_20180330_230658221-01.jpg (18.8 KB, 482 views)

Last edited by svill123; 14-10-19 at 09:41 PM.
Reply With Quote
  #2  
Old 15-05-18
craka craka is offline
Valued Member
 
Join Date: Jun 2009
Location: Newcastle (Newie)
Posts: 1,768
Default

Should be awesome for the guys with Gen3 .

Gen4 is OBDII compliant thus it's probably a lot easier for other to purchase a dongle or scanner and read the codes that way.
__________________
NS SWB X 3.2DiD - Factory locker, Hella spotties, GME UHF, roof racks otherwise stock as a rock.

Retired: 1991 NH SWB 3.0L V6 5sp Manual, Mickey Thompson ATZs, GME UHF TX3200.
Wanting: Rocksliders, 2" lift, snorkel or perhaps I should wait and purchase a NS swb in 12months time.
Reply With Quote
  #3  
Old 23-05-18
vladguan's Avatar
vladguan vladguan is offline
Valued Member
 
Join Date: Mar 2015
Location: Adelaide
Posts: 2,606
Default

Quote:
Originally Posted by craka View Post
Should be awesome for the guys with Gen3 .

Gen4 is OBDII compliant thus it's probably a lot easier for other to purchase a dongle or scanner and read the codes that way.
Not all codes are available via the OBD 2.
Reply With Quote
  #4  
Old 23-05-18
craka craka is offline
Valued Member
 
Join Date: Jun 2009
Location: Newcastle (Newie)
Posts: 1,768
Default

Quote:
Originally Posted by vladguan View Post
Not all codes are available via the OBD 2.
Yes, but you'd be referring to ones requiring a mut3,?
__________________
NS SWB X 3.2DiD - Factory locker, Hella spotties, GME UHF, roof racks otherwise stock as a rock.

Retired: 1991 NH SWB 3.0L V6 5sp Manual, Mickey Thompson ATZs, GME UHF TX3200.
Wanting: Rocksliders, 2" lift, snorkel or perhaps I should wait and purchase a NS swb in 12months time.
Reply With Quote
  #5  
Old 03-06-18
rykiel575 rykiel575 is offline
Senior Member
 
Join Date: Sep 2017
Location: Sydney
Posts: 293
Default

Pardon my ignorance but does this just ground terminal one or is there more to it?
Reply With Quote
  #6  
Old 14-12-18
warezwally warezwally is offline
Junior Member
 
Join Date: Jul 2017
Location: Hawkesbury
Posts: 5
Default

Quote:
Originally Posted by rykiel575 View Post
Pardon my ignorance but does this just ground terminal one or is there more to it?

Yes that is all it is, pretty sure its Pin1 to Pin4 (apparently 5 is earth as well)
Reply With Quote
  #7  
Old 14-10-19
DRN4SR82 DRN4SR82 is offline
Junior Member
 
Join Date: Aug 2019
Location: Craigieburn
Posts: 8
Default

So this will work on my 2000 NM 3.5.
Reply With Quote
  #8  
Old 14-10-19
svill123 svill123 is offline
Junior Member
 
Join Date: Jul 2016
Location: Melbourne
Posts: 11
Default

Quote:
Originally Posted by DRN4SR82 View Post
So this will work on my 2000 NM 3.5.
Hi, yes this will. I'll PM you.
__________________
NS Pajero 07 3.2TD Auto - 2" lift, TJM Snorkel, TJM bullbar, ProVent 200 catch can, EGR resistor mod, inlet manifold cleaned, ARB dual batteries.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Diagnostic Scanners etc erad General Info 7 03-04-15 09:54 PM
diagnostic plug short mistake Boris black Generation 3 Pajero 7 24-10-14 04:39 PM
Spark plug removal. One test plug. Goodsy Generation 3 Pajero 1 19-08-11 05:27 AM
diagnostic light fixer941 Electrical / Radios 0 18-01-11 01:35 AM
diagnostic software liam General Info 11 02-03-09 09:47 PM


All times are GMT +10. The time now is 11:22 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2019, vBulletin Solutions, Inc.