Hi, did you find the source of the noise?
Below Nav Bar Ad Module
Collapse
NT Diesel Intermittent Noise When Cold
Collapse
X
-
I had a similar noise, replaced air conditioner pulley and tighten air conditioner belt to the spec using 'CarlTune' app. This app is used to tune music instruments but also can pickup vibration of belts and show frequency.
The engine is less noisy now, I reckon idler pulley bearing was worn out.
I'll keep an ear out for that noise, hopefully it is fixed.NW M14, GLXR, spare wheel lift kit, MM tow bar, bushskinz front/sump/auto/trans/rear bumper guards and side steps, rhino pioneer platform, ARB delux bullbar
Comment
-
-
-
Originally posted by traktor View PostI had a similar noise, replaced air conditioner pulley and tighten air conditioner belt to the spec using 'CarlTune' app. This app is used to tune music instruments but also can pickup vibration of belts and show frequency.
The engine is less noisy now, I reckon idler pulley bearing was worn out.
I'll keep an ear out for that noise, hopefully it is fixed.
When I have cleaned up the turbo charger and output manifold, the turbo charger gasket is broken, which is multiple layers, which can cause high pitched noise as I heard from another member.
I'm going to find out next week.
Sent from my GM1900 using Tapatalk
Comment
-
-
But, I found a different noise like squeak after cold start and speed up.
Then I bought drive belt tensioner pulley from repco.
As I replaced drive belts no long ago.
Also, I adjusted the tension as well.
It's noise free now.
Sent from my GM1900 using Tapatalk
-
👍 1
Comment
-
Matched content
Collapse
Comment