After the machanic put his computer on my mm Pajero it came up with fault code number2 transfer case censor, car not selecting 4 x4 ,orange light starts flashing, how do access censors on top of transfer case for replacement
Below Nav Bar
Collapse
Transfer case censors
Collapse
X
-
Originally posted by erad View PostYou have to drop the rear gearbox mounting and lower the engine to get access to the switches. Not easy. Firstly, check the electrical connections further out from the gearbox - it may save a lot of work if you find a fault elsewhere.02 NM 3.2, Auto, Exceed, I/C and sump guards, L&B 2" lift, 265/75/16 OPAT2.
Comment
-
-
Check out the sticky in this section.
David
2010 NT GLS LWB Auto
Comment
-
-
Originally posted by erad View PostCorrect - I meant to lower the rear of the gearbox - carefully.
I'de be doing this too, mine does not light up any on the dash. I found 1 sensor wire that is cut when I was checking the OD solenoid.Nothing beats Doing It Yourself.... Tuned 4M40 and 4D56T WIP
Comment
-
Matched content
Collapse
Comment