Boo's Bash Plates

[FishAnd4WD]

Hi all,

I've got bushkins intercooler and sump protection plates and just after a cheaper alternative for the transmission protection guard. I've came across Boo's bash plates who specialises in underbody protection for Pajero's, Triton's, Challenger's etc... They said their plates are made from 3mm mild steel which seems pretty strong to me as many have installed them - obviously not as good as bushskinz. For a transmission guard, it's $105 delivered to my door. Have any of you guys have the Boo's plates? what is your experiences like with them?

https://www.facebook.com/boosbashplates?fref=ts

[Smallfry]

I have a full set, and would highly recommend them.

[aaron.miller]

I have boos bashplates intercooler and sump guards, seem fine to me and fitted perfectly.
re the 3mm vs the 4mm of bushskinz, arb bash plates are all 3mm.

[rotare]

I've got an intercooler guard ordered which should be delivered today. $80 delivered to your door is hard to beat.

I thought their service and communication was terrific too.

[geopaj]

Boo Boo is also a member of this forum - http://www2.pajeroclub.com.au/forum/member.php?u=26636

I have one of his transmission guards and have not had any issues - easy to fit and no major deformations despite several decent wacks

[Boo Boo]

Thanks for the feedback guys.
If anyone wants a price just PM me.
I can fit them for free also if you want to pick them up I am in the eastern suburbs of Melbourne.


Michael

[grhyso]

Does this extend far enough back to cover the transfer box too? I've removed my ironman plate temporarily as it has rusted at the points it touched the gearbox cross member and was making awful noises as the frame flexed. I need to repaint it but this may be a better solution without going all out on bushskinz.

I will add though I had the full ironman suite and the 3mm ironman intercooler and sump plates got destroyed where as the bushskinz intercooler and tjm sump (also 3mm) have faired much better. I think the design and where the folds are may have a bit to do with it.

[Boo Boo]

Hey Grhyso
My guard only extends past the rear cross member buy about 50mm so does not cover the transfer case.

[grhyso]

Thanks mate! I'll measure that out and see if I'm comfortable with that.

[Pickle]

It has come to my attention that some forum members are selling products in volume on the forum made by themselves for profit. Unless you are a Commercial Advertiser on this forum no other product other than personal items traded or sold through Market Place will be allowed to be sold on this forum unless you have permission of Moderators or Administrators exclusively.
I have directed Moderators and Admin to review members accounts if they flaunt the request to cease.
Dave

[rotare]

For the purpose of clarification, in my case at least, I purchased my bash plates from Boo Boo through eBay. I've had no communication with Boo Boo on this forum at all. Had no idea he was a member on here until this thread.

Not sure whether this is the case with others

[geopaj]

For the purpose of clarification, in my case at least, I purchased my bash plates from Boo Boo through eBay. I've had no communication with Boo Boo on this forum at all. Had no idea he was a member on here until this thread.

Not sure whether this is the case with others

Actually, I was similar - purchased via eBay and only found out Boo Boo was a Forum Member until well after the purchase.

[Gus]

Michael, (Boo Boo), thanks for your email & understanding.

Dave or I will get back to you ASAP.

Gus

One Behalf of Dave, (Pickle)

[Hatto]

I received my set of three bash plates from Boo boo on Monday. Fitted them on Monday night in about 20 mins. Perfect fit and clear instructions. Will be perfect for what I want. I put lock tight on all the bolts ... just cause I thought it was a good idea? Am I right? I had read about people stripping the threads in the brackets under the car without much force so I didn't want to over tighten them and so thought lock tight would keep them tight.

[Keenas]

I too purchased a full set and very easy to fit only took 15min including the old mm bits too. Thanks Michael.