If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Does anyone have any Scangauge 2 codes for the MR Triton 6 speed auto trans temps please.
Can't find any info anywhere.
Thanks.
2013 pb challenger xls, nudge bar, CB, dash cam, Allin H/D towbar, roof bars, EGR mod, bushskinz, catch can, 23" light bar, awning, home made draws and fridge slide.
Dave60 Try this page: https://www.scangauge.com.au/mitsubishi-x-gauges/
I went off the info for MQ Tritons and Pajero Sports and I have both Auto trans temps and Exhaust gas temps and both are working on my Scangauge2.
Be aware of the minimum firmware requirements.
The parameters are as per below:
Pajero Sport/ MQ Triton
Gauge Auto Transmission Temperature
TXD 07E02122
RXF 446105222000
RXD 2808
MTH 00010001FFD8
Notes
*might work on other models
*minimum formware required 4.36AU
Tried that code and not giving correct readings, when car is cold coolant temp is showing ambient temp as expected but trans temp always reads about 16c above.
I expect my Scangauge firmware is the issue as it is 5-6 years old now.
2013 pb challenger xls, nudge bar, CB, dash cam, Allin H/D towbar, roof bars, EGR mod, bushskinz, catch can, 23" light bar, awning, home made draws and fridge slide.
Comment