Below Nav Bar Ad Module

Collapse

Stedi light bar wiring challenge

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • olliej
    Junior Member
    • May 2012
    • 7
    • wa

    Stedi light bar wiring challenge

    I’ve got an st3k Stedi light bar with piggy back wiring and an AOB switch.

    None of the piggy back plugs to trigger the relay On high beams fit, so after some research I put a fuse tap on fuse 15 to pick up the positive and grounded the other wire. This hasn’t worked and the light bar doesn’t turn on.

    I assume it’s either how I’ve done the trigger wiring or how the AOB switch is wired.

    Any help appreciated.
  • olliej
    Junior Member
    • May 2012
    • 7
    • wa

    #2
    Nevermind. Problemo solved, it was an issue with the fuse tap and seating of the fuse in it.

    Comment

    Matched content

    Collapse
    Working...
    X