Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 1 Pajero

Generation 1 Pajero NA - NG Models 1983 - 1991

Reply
 
Thread Tools Display Modes
  #1  
Old 19-07-17
Red_101au Red_101au is offline
Junior Member
 
Join Date: Jul 2017
Location: Port Pirie SA
Posts: 37
Default DIY Drawers

I have been wanting to add some drawers to the Pajero since I had it to allow me to carry and store my camping equipment and stuff.

I finally decided to get to building it seeing as there is no retailer that currently does them for the NG Pajero...... plenty of places for Landcruisers and Patrols etc.... but thats my beef lol

anyways I started by measuring the area I had available to me..... not a lot as it has a gas tank fitted in the cargo area right behind the rear seats.

anyways I decided to give it a whirl.... now as i dont actually have a workshop, or saw bench or router bench or pretty much anything else... I had to tackle this using a circular saw and a jigsaw..... we recently removed the old kitchen in our house to install a brand new one and I still had the old melamine pantry sitting here so that was the material sorted...

First came the side walls which I had to cut to fit over the gas tank angle and bolts

once I had the walls figured out... it was simply a matter for making the slide for the fridge and frames for the drawers

then came the drawers themselves and boxing the gas tank

this project is still under way....
I still need to get hold of some marine carpet to cover the whole thing in
and line the drawers....
after all thats done I will probably fill in the sides with tops to make a continuous deck across the back....
I will also need to fit the second battery and the DC converter and Aux plugs

i will keep you posted as to the progress

Bob
Attached Images
File Type: jpg IMG_2228.JPG (44.3 KB, 38 views)
File Type: jpg IMG_2229.JPG (33.5 KB, 23 views)
File Type: jpg IMG_2231.JPG (61.1 KB, 20 views)
File Type: jpg IMG_2232.JPG (58.6 KB, 17 views)
File Type: jpg IMG_2233.JPG (46.0 KB, 15 views)
File Type: jpg IMG_2234.JPG (50.4 KB, 19 views)
File Type: jpg IMG_2235.JPG (56.2 KB, 19 views)
File Type: jpg IMG_2236.JPG (47.1 KB, 16 views)
File Type: jpg IMG_2237.JPG (49.9 KB, 17 views)
File Type: jpg IMG_2238.JPG (50.2 KB, 26 views)
File Type: jpg IMG_2240.JPG (49.0 KB, 22 views)
File Type: jpg IMG_2241.JPG (48.6 KB, 19 views)
File Type: jpg IMG_2242.JPG (58.1 KB, 24 views)
File Type: jpg IMG_2243.JPG (47.0 KB, 28 views)
__________________
1990 NG Pajero V6 Wagon
1999 PA Challenger V6
2015 LA Mirage
Reply With Quote
  #2  
Old 19-07-17
Red_101au Red_101au is offline
Junior Member
 
Join Date: Jul 2017
Location: Port Pirie SA
Posts: 37
Default

IMG_2246.JPG

IMG_2247.JPG

IMG_2248.JPG
__________________
1990 NG Pajero V6 Wagon
1999 PA Challenger V6
2015 LA Mirage
Reply With Quote
  #3  
Old 20-07-17
Seigried Seigried is offline
Valued Member
 
Join Date: Apr 2016
Location: brisbane
Posts: 536
Default

Awesome

Sent from my SM-G900I using Tapatalk
Reply With Quote
  #4  
Old 20-07-17
Apollo Apollo is offline
Member
 
Join Date: Dec 2016
Location: Cooloola Coast QLD
Posts: 119
Default

Well done. How have you secured it down?
Reply With Quote
  #5  
Old 20-07-17
Drewan's Avatar
Drewan Drewan is offline
Senior Member
 
Join Date: Apr 2017
Location: Adelaide
Posts: 291
Default

Agreed nicely done Ill score you 10 if they don't rattle like every set I've built
Reply With Quote
  #6  
Old 20-07-17
moose1178's Avatar
moose1178 moose1178 is offline
Junior Member
 
Join Date: Apr 2015
Location: Wollongong, NSW
Posts: 16
Default

I wouldn't worry too much, I did mine with a hand saw an they're still going strong.
__________________
'90 V6 5spd with: 2" lift, TJM bullbar, Drivetech LED Bar, extractors, 31" A/T's and a pool ball gearknob.
Reply With Quote
  #7  
Old 20-07-17
Red_101au Red_101au is offline
Junior Member
 
Join Date: Jul 2017
Location: Port Pirie SA
Posts: 37
Default

Quote:
Originally Posted by Apollo View Post
Well done. How have you secured it down?
I still havent secured it at this stage...
but I am planning on using the existing anchor rings that are fitted to the car
I am thinking at this stage I will use a turn buckle style to secure it to them

Bob
__________________
1990 NG Pajero V6 Wagon
1999 PA Challenger V6
2015 LA Mirage
Reply With Quote
  #8  
Old 20-07-17
Red_101au Red_101au is offline
Junior Member
 
Join Date: Jul 2017
Location: Port Pirie SA
Posts: 37
Default

Quote:
Originally Posted by Drewan View Post
Agreed nicely done Ill score you 10 if they don't rattle like every set I've built
so far so good as far as the rattles
and once it is lined with carpet that should quieten it all the more

about the only noise i get from them at this stage is the junk in the drawers lol

but as yet i still havent tried them on any rough surface as such
__________________
1990 NG Pajero V6 Wagon
1999 PA Challenger V6
2015 LA Mirage
Reply With Quote
  #9  
Old 20-07-17
Red_101au Red_101au is offline
Junior Member
 
Join Date: Jul 2017
Location: Port Pirie SA
Posts: 37
Default

I have had to do a slight modification to the left drawer
as you can see in the pic... where I cut out the top corners to allow the slides to exit wasnt very neat
so I made a new front panel for the drawer and made it a snugger fit and have the face of the drawers and deck all flush now
__________________
1990 NG Pajero V6 Wagon
1999 PA Challenger V6
2015 LA Mirage
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Drawers for an NS ryv Accessories (inc. Parts) 19 13-02-17 02:43 PM
Drawers for an NS ryv Bolted on bits, factory and aftermarket accessories 14 26-05-16 03:31 PM
Rear Drawers need help Korvorka Generation 3 Pajero 13 29-10-11 06:32 PM
Diy : Swb gen 2 drawers tinman Do It Yourself Projects 1 23-06-11 09:34 AM
Drawers are finally on!!!! Jeelan Generation 4-1 Pajero 15 18-07-08 05:02 PM


All times are GMT +10. The time now is 05:13 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.