Below Nav Bar

Collapse

King Spring Seats

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
  • zippy
    Member
    • Apr 2010
    • 50
    • Perth

    King Spring Seats

    Hey guys, do you know what I can get hold of spring seat for Gen 3 Pajero?

    I've looked on ebay, contacted my local auto shop and they are not able to help. I contacted King Spring directly and they do not sell spring seat for their springs (I find that a bit weird)

    Anyway do anyone know where I can get hold of them? My lower rear spring seats are badly cracked. The measurement is ID 112mm OD 156mm.

    Will I need to contact MM directly?

    Thanks in advance.
    2002 Pajero NP 3.2L 4M41 GLS
  • nifty
    Valued Member
    • Sep 2009
    • 513

    #2
    Genuine are about $80 each. I got 2 off a wrecker for $20 but they were already showing pretty bad wear. The vehicle they came off had done 170,000.

    I think the heavier springs also wear them out faster than standard due to the increased pressure squeezing the rubber.

    I'd be keen to hear of some to fit Lovells springs too.

    Comment

    • Dakar-01
      Member
      • Jul 2008
      • 168
      • Geraldton

      #3
      upon investigation my rear coil seat is absolutely shagged... anyone found anything as a replacememt yet for the heayier duty springs?
      2004 MK Triton v6. 2.5zorst. Xtractors no cat' highflow muffler. KN airflow n Hiclone. (Nuthin lost). Spots n worlights n patrol wheels with 265 75 16 yoko at.
      Nolothaned swaybar. Next on list is suspension an hd control arms

      Comment

      • green monster
        Valued Member
        • Apr 2008
        • 1525
        • Adelaide

        #4
        i replaced mine with hd urethane 10mm spacers from the front of an 80 series land cruiser, got them from 4wd systems in Adelaide for about $40, they fit quite well and so far are still where i left them,
        cheers
        NX ARB bar totally stock,, for now and the trusty old NM Exceed ,Injected LPG. ARB Sahara bar 12000lb Tigerz11winch,Lightforce genisis ,2x stealth LED bars, rear LED reverse light, GU Patrol black wheels 32"BFGs ,custom alloy roof rack with twin awnings,, snorkel, Milford barrier, custom rear storage ,triple batteries,fridge slide,Pioneer touchscreen unit, 50L Waeco,UHF,lots of scratches down the sides, new super powerful engine!,bash plates, 3" lift,polyairs Dobinsons,extractors ,Maxtrax

        Comment

        • Dakar-01
          Member
          • Jul 2008
          • 168
          • Geraldton

          #5
          that sounds ideal... as another 10mm would be great aswell. and Id rather the urethane anyway another 10mm on front would be nice too have an option for that?
          2004 MK Triton v6. 2.5zorst. Xtractors no cat' highflow muffler. KN airflow n Hiclone. (Nuthin lost). Spots n worlights n patrol wheels with 265 75 16 yoko at.
          Nolothaned swaybar. Next on list is suspension an hd control arms

          Comment

          • budgie
            Member
            • May 2009
            • 186
            • brisbane

            #6
            Thats what i did Put 20mm spacers in about $30 pair Ring around as prices vary alot up to $50 each
            2006 NP Snorkel Bullbar More goodies come 2001 NM full of goodies

            Comment

            • Dakar-01
              Member
              • Jul 2008
              • 168
              • Geraldton

              #7
              who actually supplies these? nolothane list nothing
              2004 MK Triton v6. 2.5zorst. Xtractors no cat' highflow muffler. KN airflow n Hiclone. (Nuthin lost). Spots n worlights n patrol wheels with 265 75 16 yoko at.
              Nolothaned swaybar. Next on list is suspension an hd control arms

              Comment

              • budgie
                Member
                • May 2009
                • 186
                • brisbane

                #8
                Anyone who sells springs etc I got mine from Carroll springs in Brisbane They where the cheapest around I rang about 5 places
                2006 NP Snorkel Bullbar More goodies come 2001 NM full of goodies

                Comment

                • Dakar-01
                  Member
                  • Jul 2008
                  • 168
                  • Geraldton

                  #9
                  Originally posted by green monster View Post
                  i replaced mine with hd urethane 10mm spacers from the front of an 80 series land cruiser, got them from 4wd systems in Adelaide for about $40, they fit quite well and so far are still where i left them,
                  cheers
                  would these be similar??
                  2004 MK Triton v6. 2.5zorst. Xtractors no cat' highflow muffler. KN airflow n Hiclone. (Nuthin lost). Spots n worlights n patrol wheels with 265 75 16 yoko at.
                  Nolothaned swaybar. Next on list is suspension an hd control arms

                  Comment

                  • budgie
                    Member
                    • May 2009
                    • 186
                    • brisbane

                    #10
                    Thats them
                    2006 NP Snorkel Bullbar More goodies come 2001 NM full of goodies

                    Comment

                    • Snapcatcher
                      Valued Member
                      • Feb 2009
                      • 699
                      • Brisbane

                      #11
                      $14.50

                      Silver NM Pajero 3.5L Auto. ARB bullbar, Opposite Lock Rear bar, Front Lokka, Uniden UHF, Bilstein shocks, Lovells HD coils, TJM OX 9500lb Winch, Snorkel, 33" BFG KM2's on 16x8 Advanti Rims, Custom bash plate, Cargo Barrier, Lightforce 170s, Rhino Pioneer Platform, Ironman Awning, Duel battery system.

                      Comment

                      Matched content

                      Collapse
                      Working...
                      X