Pajero 4WD Club of Victoria Public Forum Pajero 4WD Club of Victoria Public Forum

Go Back   Pajero 4WD Club of Victoria Public Forum > Vehicles > Generation 4-3 Pajero

Generation 4-3 Pajero NW model 2011 - 2014

Thread Tools Display Modes
Old 10-09-19
Nuggy Nuggy is offline
Junior Member
Join Date: May 2019
Location: Perth
Posts: 12
Default Rear coil spacer

Quick question regarding rear coil spacers.
I'm looking at putting in 20mm spacers and I'm wondering if others are leaving the standard coil spring bush and fitting the spacer on-top or removing it and just using the poly spacer?
2012 NW Platinum 3.2L
Reply With Quote
Old 10-09-19
old Jack's Avatar
old Jack old Jack is offline
Join Date: Jun 2011
Location: Adelaide, South Australia.
Posts: 7,902

If you are fitting a 20mm spacer to the upper coil pad it needs to be a one piece spacer and specially shaped so it locates the coil correctly. 20mm spacer will increase your ride height between 35mm to 40mm.

2011 PB Base White Auto, Smartbar, Cooper STMaxx LT235/85R-16,TPMS, HR TB, 3 x Bushskinz, front +40mm Dobinson , rear +50mm EHDVR Lovells, Dobinson MT struts and shockers, Peddars 5899 cone springs, Windcheater rack, GME UHF, Custom alloy drawer system inc. 30lt Engel & 2 x 30 AH LiFePo batteries + elec controls, Tailgate hi-lift/long struts, Phillips +100 LB & HB, Lightforce 20" single row driving beam LED lightbar, Scanguage II.
MM4x4 Auto Mate, Serial No 1 .
Reply With Quote
Old 14-09-19
mattjones mattjones is offline
Junior Member
Join Date: Aug 2013
Location: ellenbrook
Posts: 14

i used landcruiser 80 series front spacers, i think they were 25mm spacer & had about 40mm lift, i left the rubber bush above the spacer, i had them in there for about 60,000km with no drams
Reply With Quote
Old 16-09-19
Stacho Stacho is offline
Junior Member
Join Date: Apr 2018
Location: Perth
Posts: 48

I removed my standard rubber bush when fitting the poly spacer. It eventually settled a little lower than I liked so I put the standard rubber one back, so now I have both. My poly spacer was only 15mm though.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
New rear coil springs for my NP Michal Generation 3 Pajero 6 16-04-18 08:31 AM
Coil spring spacer for NS Pajero Kas Generation 4-1 Pajero 6 09-12-16 08:54 AM
Coil spacers in rear 78shane Generation 2 Pajero 4 09-09-16 08:05 AM
Just Fitted GQ Coil's to the Rear Jerro Generation 2 Pajero 93 12-05-12 07:40 PM
Rear coil question rob and mark Generation 2 Pajero 2 02-08-09 03:20 PM

All times are GMT +10. The time now is 05:58 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2020, vBulletin Solutions, Inc.